Abstract:The high electronic-mobility ZnO was developed as binder with a mesoporous carbon (MC) as catalytic material to fabricate a novel ZnO-MC counter electrode through in-situ formation technique. The homogeneous MC blended paste containing the ZnO sol was first coated on the conductive substrate, and then annealed in ambient atmosphere to obtain the ZnO-MC electrode. The annealing temperature is a key factor to obtain the high-performance ZnO-MC electrode. When annealed at 300 degrees C, the in-situ formed and dispersed ZnO nanoparticles are functioned as bridges to bind the MC particles and to strengthen the adhesion of the carbon film to the substrate, providing enough conductive paths for the transportation of the electrons to participate timely in the reduction of tri-iodide (I-3(-)), and further improving the electrochemical performances of the electrode. As a result, the efficiency of the ZnO-MC electrode for use in dye-sensitized solar cells (DSCs) enhances from 2.5% to 6.37% compared with the binder-free MC electrode. Importantly, the ZnO-MC electrode exhibits higher catalytic activity for the I-3(-) reduction than the MC electrode using carboxymethyl cellulose (CMC) as binder, leading to an increase of 14.2% in the efficiency of the cell, which is mainly from the high electronic-mobility of the ZnO. Furthermore, the efficiency of the low cost ZnO-MC based DSCs reaches 90.4% of that of the Pt based ones. Noted that compared with the Pt electrode, the ZnO-MC electrode is beneficial to obtain a device with higher open-circuit voltage. (C) 2013 Elsevier Ltd. All rights reserved.

Preparation and Performance of Dye-Sensitized Solar Cells Based on Zno-Modified Tio2 Electrodes

Improved Performance of Dye Sensitized Solar Cells Using Cu-doped TiO2 As Photoanode Materials: Band Edge Movement Study by Spectroelectrochemistry

Impacts of ZnO/TiO<sub>2</sub> Assorted Electrode on Photoelectric Characteristics of Dye-Sensitized Solar Cells

Impacts of ZnO/TiO 2 Assorted Electrode on Photoelectric Characteristics of Dye-Sensitized Solar Cells

Photoelectric Performance Optimization of Dye-Sensitized Solar Cells Based on ZnO-TiO2 Composite Nanofibers

Synthesis of Zn-doped TiO2 Microspheres with Enhanced Photovoltaic Performance and Application for Dye-Sensitized Solar Cells

Electron Transportation in the Tio2/Zno Film Electrodes and Application for Dye-Sensitized Solar Cells

Performances of ZnO-Based Dye Sensitized Solar Cells Fabricated by Hydrothermal Synthesis and Sol-Gel Technique

Zinc-doping in TiO 2 films to enhance photovoltaic performance of Dye-sensitized solar cells

Research on Photovoltaic Measurement and Electrochemical Impedance Spectroscopy Analysis of Dye-Sensitized Solar Cells With Modification of Photoanodes by TiO2 Nanofibers Composited With Zn2SnO4-SnO2 Under Various Illuminances

The Mechanism of Dye-Sensitized Solar Cell Based on Nanocrystalline ZnO Films

ZnO/TiO2 Composite Photoanodes for Efficient Dye-Sensitized Solar Cells

Conveniently Fabricated Heterojunction Zno/Tio2 Electrodes Using Tio2 Nanotube Arrays for Dye-Sensitized Solar Cells

ZnO NANOPOROUS DISK–TiO2 NANOPARTICLE HYBRID FILM ELECTRODE FOR DYE-SENSITIZED SOLAR CELLS

Improved photovoltaic performance of dye-sensitized solar cells (DSSCs) by Zn + Mg co-doped TiO2 electrode

Interfacial Modification of Photoelectrode in ZnO-based Dye-Sensitized Solar Cells and Its Efficiency Improvement Mechanism

Effect of Ultra-Thin ZnO Coating Layer on the Device Performance of TiO2 Dye Sensitized Solar Cell

In-situ Formation of Dispersed ZnO Nanoparticles in Mesoporous Carbon Counter Electrode for Efficient Dye-Sensitized Solar Cells

<font>ZnO</font> NANOPOROUS DISK–<font>TiO</font><sub>2</sub> NANOPARTICLE HYBRID FILM ELECTRODE FOR DYE-SENSITIZED SOLAR CELLS

Zinc-Doping in TiO<sub>2 </sub>Films to Enhance Photovoltaic Performance of Dye-Sensitized Solar Cells

Improved Voltage and Fill Factor by Using Zinc Oxide Thin Film As a Barrier Layer in Dye-Sensitized Solar Cells