Abstract:The high electronic-mobility ZnO was developed as binder with a mesoporous carbon (MC) as catalytic material to fabricate a novel ZnO-MC counter electrode through in-situ formation technique. The homogeneous MC blended paste containing the ZnO sol was first coated on the conductive substrate, and then annealed in ambient atmosphere to obtain the ZnO-MC electrode. The annealing temperature is a key factor to obtain the high-performance ZnO-MC electrode. When annealed at 300 degrees C, the in-situ formed and dispersed ZnO nanoparticles are functioned as bridges to bind the MC particles and to strengthen the adhesion of the carbon film to the substrate, providing enough conductive paths for the transportation of the electrons to participate timely in the reduction of tri-iodide (I-3(-)), and further improving the electrochemical performances of the electrode. As a result, the efficiency of the ZnO-MC electrode for use in dye-sensitized solar cells (DSCs) enhances from 2.5% to 6.37% compared with the binder-free MC electrode. Importantly, the ZnO-MC electrode exhibits higher catalytic activity for the I-3(-) reduction than the MC electrode using carboxymethyl cellulose (CMC) as binder, leading to an increase of 14.2% in the efficiency of the cell, which is mainly from the high electronic-mobility of the ZnO. Furthermore, the efficiency of the low cost ZnO-MC based DSCs reaches 90.4% of that of the Pt based ones. Noted that compared with the Pt electrode, the ZnO-MC electrode is beneficial to obtain a device with higher open-circuit voltage. (C) 2013 Elsevier Ltd. All rights reserved.

Improvement of the Performance and Stability of the Zno Nanoparticulate Film Electrode by Surface Modification for Dye-Sensitized Solar Cells

Stability improvement of the ZnO nanowire array electrode modified with Al 2O 3 and SiO 2 for dye-sensitized solar cells

Effect of Surface Modifications on ZnO Nanorod Arrays Electrode for Dye-Sensitized Solar Cells

Research progress of nano ZnO materials in dye/quantum dot sensitized solar cells

Improved Charge Generation and Collection in Dye-Sensitized Solar Cells with Modified Photoanode Surface

Effect of surface modifications on ZnO nanorod arrays electrode for dye-sensitized solar cells.

Surface Destruction and Performance Reduction of the ZnO Nanowire Arrays Electrode in Dye Sensitization Process

Improvement of the Performance of Dye Sensitized Solar Cell Using ZnO Nanorods Array Deposited with Ag Nanoparticles As Photoanode

Incorporating Zn2SnO4 Quantum Dots and Aggregates for Enhanced Performance in Dye-Sensitized ZnO Solar Cells.

Improvement of the Performance of Dye-Sensitized Solar Cells Using Sn-Doped Zno Nanoparticles

Dye-Sensitized Solar Cells With Composite Zno/Sno2 Nanoporous Electrodes

Cathodic Electrodeposition of Nanocrystalline ZnO Films for Dye-Sensitized Solar Cell Applications

Preparation and Performance of Dye-Sensitized Solar Cells Based on Zno-Modified Tio2 Electrodes

Electrodeposited Nanoporous ZnO Films Exhibiting Enhanced Performance in Dye-Sensitized Solar Cells

In-situ Formation of Dispersed ZnO Nanoparticles in Mesoporous Carbon Counter Electrode for Efficient Dye-Sensitized Solar Cells

Effect of surface etching on the efficiency of ZnO-based dye-sensitized solar cells.

Inhibiting Formation of Zn2+/N179 Molecules Insulation Layer and Degradation of ZnO-based Dye-Sensitized Solar Cells Via Quasi-Solid-state Electrolytes

Preparation and Photoelectrochemical Performance for ZnO Nanorod Arrays/Nanoparticles Aggregate Composite Films

Zinc Oxide Precursor Treatment for Improving Dye-Sensitized Solar Cell Efficiency

A ZnO Nanorod Layer with a Superior Light-Scattering Effect for Dye-Sensitized Solar Cells

Improvements to the hierarchically structured ZnO nanosphere based dye-sensitized solar cells