Abstract:In this paper, we reviewed recent systematic studies of using ZnO nanotetrapods for photoanodes of dye-sensitized solar cells (DSSCs) in our group. First, the efficiency of power conversion was obtained by more than 3.27% by changes of conditions of dye loading and film thickness of ZnO nanotetrapod. Short-circuit photocurrent densities (J sc) increased with the film thickness, J sc would not be saturation even the film thickness was greater than 35 μm. The photoanode architecture had been charactered by good crystallinity, network forming ability, and limited electron-hopping interjunctions. Next, DSSCs with high efficiency was devised by infiltrating SnO2 nanoparticles into the ZnO nanotetrapods photoanodes. Due to material advantages of both constituents described as above, the composite photoanodes exhibited extremely large roughness factors (RF s), good charge collection, and tunable light scattering properties. By varying the composition of the composite photoanodes, we had achieved an efficiency of 6.31% by striking a balance between high efficiency of charge collection for SnO2 nanoparticles rich films and high light scattering ability for ZnO nanotetrapods rich films. An ultrathin layer of ZnO was found to form spontaneously on the SnO2 nanoparticles, which primarily was responsible for enhancing open-circuit photovoltage (V oc). We also identified that recombination in SnO2/ZnO composite films was mainly determined by ZnO shell condition on SnO2, whereas electron transport was greatly influenced by the morphologies and sizes of ZnO crystalline additives. Finally, we applied the composite photoanodes of SnO2 nanoparticles/ZnO nanotetrapods to flexible DSSCs by low temperature technique of “acetic acid gelation-mechanical press-ammonia activation.” The efficiency has been achieved by 4.91% on ITO-coated polyethylenenaphtalate substrate. The formation of a thin ZnO shell on SnO2 nanoparticles, after ammonia activation, was also found to be critical to boosting V oc and to improving inter-particles contacts. Mechanical press, apart from enhancing film durability, also significantly improved charge collection. ZnO nanotetrapods had been demonstrated to be a better additive than ZnO particles for the improvement of charge collection in SnO2/ZnO composite photoanodes regardless of whether they were calcined.

Fabrication of dye-sensitized solar cells with ZnO nanorods as photoanode and natural dye extract as sensitizer

Facile Fabrication of ZnO Nanorods/zno Nanosheet–spheres Hybrid Photoanode for Dye-Sensitized Solar Cells

ZnO nanotube-based dye-sensitized solar cell and its application in self-powered devices.

Hydrothermal Growth of ZnO Nanowires Scaffolds Within Mesoporous TiO2 Photoanodes for Dye-Sensitized Solar Cells with Enhanced Efficiency

Enhancing the Performance of Dye-Sensitized Solar Cells by ZnO Nanorods/zno Nanoparticles Composite Photoanode

Enhancing DSSC Performance through Manipulation of the Size of ZnO Nanorods

Integrated ZnO nanotube arrays as efficient dye-sensitized solar cells

A Zno/Tio2 Composite Nanorods Photoanode with Improved Performance for Dye-Sensitized Solar Cells

Efficient Dye-Sensitized Solar Cells Based On Nanoflower-Like Zno Photoelectrode

Nanorod-Nanosheet Hierarchically Structured Zno Crystals on Zinc Foil As Flexible Photoanodes for Dye-Sensitized Solar Cells

Enhancing Dye-Sensitized Solar Cell Performance with Different Sizes of ZnO Nanorods Grown Using Multi-Step Growth

Facile Construction of Nanofibrous Zno Photoelectrode for Dye-Sensitized Solar Cell Applications

Fabrication of ZnO/ZnO @ carbon dot as photo anode and Natural dye as photosensitizer for dye sensitized solar cell application

Fabrication, Characteristics and Application in Dye-Sensitized Solar Cell of Vertically Alligned ZnO Nanorod Arrays Guided with Polyethyleneimine via Hydrothermal Method

Hierarchical ZnO Architectures Consisting of Nanorods and Nanosheets Prepared Via a Solution Route for Photovoltaic Enhancement in Dye-Sensitized Solar Cells

Porous ZnO Nanosheet Arrays Constructed on Weaved Metal Wire for Flexible Dye-Sensitized Solar Cells.

Fabrication of in Doped ZnO Thin Films by Spray Pyrolysis As Photoanode in DSSCs

Dye-sensitized solar cells based on ZnO nanotetrapods

Dye-sensitized solar cells based on a 1D/3D double-layered ZnO photoanode with improved photovoltaic performance

Dye-sensitized solar cells based on ZnO nanowire array/TiO 2 nanoparticle composite photoelectrodes with controllable nanowire aspect ratio

Enhanced Electron Extraction Using ZnO/ZnO-SnO2 Solid Double-Layer Photoanode Thin Films for Efficient Dye Sensitized Solar Cells