Abstract:A method for the determination of impurities in iron-nickel-based superalloys by high-resolution glow discharge mass spectrometry is described. The optimum discharge conditions were investigated to obtain stable discharge and good sensitivity. The interference was separated in high resolution mode of the instrument. The calibration relative sensitivity factors (RSF) for 12 elements were obtained with the matrix-matched certified reference material. IARM Ni909-18. The reference material was analyzed by using the calibration RSFs. The relative error of the measured value was within 16.4% compared with the certified value, and the relative standard deviation (RSD) was less than 7.0%. The 12 elements in the iron-nickel-based superalloy were determined using the calibration RSFs (quantitative analysis) and the standard RSFs (semi-quantitative analysis) in the instrument, including C, N, O and S. The results of the verification methods, such as inductively coupled plasma optical emission spectrometry (ICP-OES), inductively coupled plasma mass spectrometry (ICP-MS), high frequency combustion infrared absorption and inert gas pulse infrared thermal conductivity, were closer to quantitative analysis results. The elements without certified values in the reference material were determined by using the standard RSFs. There was no significant difference between the results of GDMS and the verification by ICP-MS. The validation revealed that the proposed analytical approach achieves reliable results for the rapid determination of several impurities, such as metals as well as non-metals, even the gas elements C, N, O and S.

Determination of Elemental Impurities in Iron-Nickel-Based Superalloys by Glow Discharge Mass Spectrometry

Determination of Trace Impurity Elements in MnZn Ferrite Powder by Direct Current Glow Discharge Mass Spectrometry

Determination of As, Pb, Sn, Sb and Bi in High Temperature Iron and Nickel-Based Alloy by Graphite Furnace Atomic Absorption Spectrometry Combined with Liquid-Liquid Extraction

Determination of impurities in ultra-high purity aluminum by glow discharge mass spectrometry

Determination of tungsten,nickel,iron and vanadium in cobalt chromium tungsten alloy by inductively coupled plasma atomic emission spectrometry

Determination of Ni, Al, Mn and Si in copper based alloy by high current and microsecond pulsed glow discharge optical emission spectrometry]

Determination of Ni,Al,P,Mg and Ca in Nickel Ores by Inductively Coupled Plasma-Atomic Emission Spectrometry

Determination of trace elements in high purity nickel by high resolution inductively coupled plasma mass spectrometry

On-line Electrolytic Dissolution of Alloys and Multi-Element Determination by Inductively Coupled Plasma Atomic Emission Spectrometry

Determination of Impurity Elements in MnZn Ferrites by Inductively Coupled Plasma Mass Spectrometry

Mesoscopic quantitative chemical analyses using STEM-EDX in current and next generation polycrystalline Ni-based superalloys

Determination of Impurity Elements in High Purity Graphite by Inductively Coupled Plasma-Mass Spectrometry

Development of the method for quantitative determination of impurities content in heat-resistant welded nickel alloys using the atomic-emission spectrometry with inductively coupled plasma

Determination of trace nickel in Bi-based superconductor powder by inductively coupled plasma atomic emission spectroscopy after separation with anion exchange resin and extraction with methylbenzene

Determination of Tin in Nickel-based Alloys by Electrothermal Laser-excited Atomic Fluorescence with Confirmation of Accuracy by Inductively Coupled Plasma Mass Spectrometry and Atomic Absorption Spectrometry

Determination of Impurities in Bright Nickel Plating Bath by Inductively Coupled Plasma-Mass Spectrometry

Quantification of Trace Amounts of Impurities in High Purity Cobalt by High Resolution Inductively Coupled Plasma Mass Spectrometry

Study on the Determination of Impurities Elements of Sb, Cu,Sn,Si and P in Ferromolybenum by ICP-MS

Determination of Cr, Ni, Cu, Mn, P, Si, Mo and Ti in high chromium cast iron by inductively coupled plasma atomic emission spectrometry

Determination of Nickel after Online Sorbent Preconcentration by FI-FAAS Using Dimethylglyoxime as a Complexing Agent

Study on solid phase extraction and graphite furnace atomic absorption spectrometry for the determination of nickel, silver, cobalt, copper, cadmium and lead with MCI GEL CHP 20Y as sorbent.