Abstract:An analytical method for the determination of 26 impurity elements in high purity cobalt powder was established by inductively coupled plasma tandem mass spectrometry (ICP-MS/MS). The high purity cobalt powder was disposed by microwave digestion using a mixture of nitric acid and hydrochloric acid as the digestion reagent and then determined directly by ICP-MS/MS. In the MS/MS mode, the mass spectral interferences on the analytes by polyatomic ions could be eliminated by adding different reaction gases into the collision/reaction cell (CRC). Using O2 as the reaction gas, the mass-shift reaction of P+, S+, V+, As+, Se+ with O2 occurred, and the corresponding oxide ions generated were used for the measurement. When H2 was added to the CRC as the reaction gas, the mass-shift reaction between the interfering ions and H2 occurred. Si+ and Ca+ were determined by on-mass method. When NH3/He was added as the reaction gas, cluster ions generated by the mass-shift reaction of Ti+, Cr+, Mn+, Fe+, Ni+, Cu+, and Zn+ with NH3/He. The mass-shift method was used for determination by employing the mass-shift reaction between interfering ions and NH3/He, and Na+, Mg+, A1+, and K+ were determined by the on-mass method. The matrix effect was corrected via on-line addition of the internal standard elements. The results showed that the detection limit of analyte was in the range 0.02–97.5ng/L, and the linear correlation coefficients were ≥0.9996, showing a good linear relationship. Moreover, the spike recoveries were in the range 91.6%–109.2%. Therefore, this method is well suited for the determination of 26 impurity elements in high purity cobalt powder above 5N (≥99.999%).

Determination of trace elements in high purity nickel by high resolution inductively coupled plasma mass spectrometry

Quantification of Trace Amounts of Impurities in High Purity Cobalt by High Resolution Inductively Coupled Plasma Mass Spectrometry

Determination of Impurities in Bright Nickel Plating Bath by Inductively Coupled Plasma-Mass Spectrometry

Determination of Trace Impurities in High Purity Titanium Dioxide by High Resolution Inductively Coupled Plasma Mass Spectrometry

Analysis of Impurity Elements in High Purity Cobalt Powder by Inductively Coupled Plasma Tandem Mass Spectrometry

Determination of trace nickel in Bi-based superconductor powder by inductively coupled plasma atomic emission spectroscopy after separation with anion exchange resin and extraction with methylbenzene

Determination of Ni,Al,P,Mg and Ca in Nickel Ores by Inductively Coupled Plasma-Atomic Emission Spectrometry

Determination of Trace Elements in Residual Oil by High-Resolution Inductively Coupled Plasma Mass Spectrometry

Determination of Impurities in High Pure Copper by Electrolytic Separation-Inductively Coupled Plasma Mass Spectrometry

Determination of Impurity Elements in MnZn Ferrites by Inductively Coupled Plasma Mass Spectrometry

Determination of hydride-forming elements in high purity coppers by inductively coupled plasma atomic emission spectrometry

Determination of Trace Phosphorus in Cobalt-Niobium-zirconium Alloy by Inductively Coupled Plasma Atomic Emission Spectrometry

Determination of Ultra-Trace Platinum, Palladium, Ruthenium, Rhodium, and Iridium in Rocks and Minerals by Inductively Coupled–Plasma Mass Spectrometry Following Nickel Sulfide Fire Assay Preconcentration and Open Mixed Acid Digestion

Direct determination of trace elements lead and tin in high purity nickel by GFAAS

Determination of Elemental Impurities in Iron-Nickel-Based Superalloys by Glow Discharge Mass Spectrometry

Determination of Trace Metal Impurities in High Pure Tin Oxide Electrode Material by Inductively Coupled Plasma Mass Spectrometry

Determination of Trace Amounts of Nickel in Cobalt-Chromium-Molybdenum Alloys by Icp-Aes after Liquid-Liquid Extraction

Determination of Impurity Elements in High Purity Graphite by Inductively Coupled Plasma-Mass Spectrometry

Analysis of Ultra-Trace Impurities in High Purity Molybdenum Powder through Inductively Coupled Plasma Tandem Mass Spectrometry

Determination of As, Pb, Sn, Sb and Bi in High Temperature Iron and Nickel-Based Alloy by Graphite Furnace Atomic Absorption Spectrometry Combined with Liquid-Liquid Extraction

Study on determination of noble metal ions in geologic sample by inductive coupling plasma-mass spectroscopy