Abstract:Highlights • Interference-free determination of impurity elements in high-purity Mg by ICP-MS/MS. • Spectral interferences were eliminated using N 2 O/H 2 as the reaction gas. • The synergistic effect of N 2 O and H 2 was used to eliminate spectral interference. • The limit of detection of analytes were in the range of 0.02–18.5 ng L − 1 . High purity magnesium is not only an important basic raw material for semiconductor and electronics industries, but also a promising new generation of electrochemical energy storage materials and biomedical materials. Impurities in high-purity magnesium affect material properties, which has become the most critical factor restricting its application. However, accurate analysis of multiple ultra-trace impurity elements in high-purity magnesium is extremely challenging. In this paper, based on the synergistic effect of N 2 O/H 2 reaction gas mixture to eliminate spectral interference of inductively coupled plasma tandem mass spectrometry (ICP-MS/MS), a new strategy for the quantification of 45 ultra-trace impurity elements in high-purity magnesium was proposed. The results indicated that the limits of detection (LOD) were in the range of 0.02–18.5 ng L − 1 ; the LODs of the challenging non-metallic elements Si and S were 18.5 and 12.2 ng L − 1 , respectively; and the LODs of all the other analytes were less than 10 ng L − 1 . Even under hot plasma conditions, LODs of alkali metal elements were also less than 5 ng L − 1 . The spike recovery of each analyte was 93.6%–107%, and the relative standard deviation (RSD) was 3.2%–6.9%, respectively. At a 95% level of confidence, no significant differences were found between the results obtained under the optimal conditions for the analyte with the developed method and the measurement results of SF-ICP-MS. The developed method indicated low LOD, high sample throughput, and complete interference elimination, demonstrating a new avenue for the rapid determination of ultra-trace elements in high-purity magnesium.

Development of a novel strategy for the quantification of ultra-trace impurity elements in high-purity magnesium using inductively coupled plasma tandem mass spectrometry

Interfacing Nanoliter Liquid Chromatography and Inductively Coupled Plasma Mass Spectrometry with an In-Column High-Pressure Nebulizer for Mercury Speciation.

Enhanced ICP-MS detection of 24 elemental impurities in complex, high matrix mineral, medicinal lanthanum carbonates according to ICH Q2 (R2)

Optimized ultrasound-assisted dispersive liquid–liquid microextraction for simultaneous trace multielement determination of heavy metals in environmental water samples by ICP-MS

Determination of Impurities in Magnesium Alloys by Inductively Coupled Plasma Mass Spectrometry

Simultaneous Measurements of Cr, Cd, Hg and Pb Species in Ng L-1 Levels by Interfacing High Performance Liquid Chromatography and Inductively Coupled Plasma Mass Spectrometry.

Simultaneous Multi-Elemental Speciation of As, Hg and Pb by Inductively Coupled Plasma Mass Spectrometry Interfaced with High-Performance Liquid Chromatography

Elimination of suction effect in interfacing microchip electrophoresis with inductively coupled plasma mass spectrometry using porous monolithic plugs.

High-precision Mg isotope analyses of low-Mg rocks by MC-ICP-MS

Dispersive Liquid–Liquid Microextraction and Micro-Solid Phase Extraction for the Rapid Determination of Metals in Food and Environmental Waters

On-Line Metal Concentration Measurement at an Ultra-Trace Level in DIW by Solid Phase Extraction Method Coupled with ICP-MS

Coupling of an electrodialyzer with inductively coupled plasma mass spectrometry for the on-line determination of trace impurities in silicon wafers after surface metal extraction

Chloroformylation-Separation of Matrix and Determination of Trace Impurities in High Purity Chromium by ICP-MS

Determination of impurities in ultra-high purity aluminum by glow discharge mass spectrometry

Development and optimization of a triple quadrupole ICP-MS–based system for the quantification of pre-concentrated gaseous elementary mercury

A single-column and efficient procedure for separating Fe and Mg from geological materials for isotopic analyses using MC-ICP-MS

The Separation Behavior of Impurities in the Purification of High-Purity Magnesium via Vacuum Distillation

Determination of 14 trace rare earth impurities in high-purity CeO2 by inductively coupled plasma mass spectrometry with membrane desolvation

Minimization of mass interferences in quadrupole inductively coupled plasma mass spectrometric (ICP-MS) determination of palladium using a flow injection on-line displacement solid-phase extraction protocol

High purity magnesium comparison-gas volumetric determination of calcium or magnesium in steelmaking auxiliary materials

Determination of Trace Thorium and Uranium Impurities in Scandium with High Matrix by ICP-OES