Abstract:Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES), Flame Atomic Absorption Spectrometry (FAAS) and Visible Spectrometry (VS) was applied for determination of Ag and Li in lithium-aluminium alloy standard sample and test sample, their respective advantages and disadvantages were compared, the excellent selectivity of ICP-OES was confirmed by analyses of certified standard sample. Three different sample digestion methods were compared and discussed in this study. It was found that the better accuracy would be obtained by digesting sample with chloroazotic acid while the content of Li was measured by FAAS, and it was better to digest sample with hydrochloric acid and hydrogen peroxide while determining Ag and Li by ICP-OES simultaneously and determining Ag by FAAS and VS. The interference of co-existing elements and elimination methods was detailedly discussed. Ammonium hydroxide was added to adjust the sample solution into alkalescent and Al, Ti, Zr was precipitated by forming hydroxide precipitation, Mg and Cu was formed complex precipitation with 8-hydroxyquinoline in this condition, then the interference from matrix element to determinate Ag by FAAS was eliminated. In addition, phosphate was used to precipitate Ti to eliminate its interference for determination of Li by FAAS. The same treatment of determination for Ag by FAAS was used to eliminate the interference of matrix element for determination of Ag by VS, the excess of nitrate was added into sample and heated to release Ag+ from silver chloride complex, and the color of 8-hydroxyquinoline was eliminated because of decomposed by heating. The accuracy of analysis result for standard sample was conspicuously improved which confirms the efficient of the method to eliminate interference in this study. The optimal digestion method and eliminate interference method was applied to lithium-aluminium alloy samples. The recovery of samples was from 100.39% to 103.01% by ICP-OES determination for Ag, and from 100.42% to 103.01% by ICP-OES determination for Li. The recovery ranged from 95.91% to 99.98% by FAAS determination for Ag, and ranged from 98.04% to 99.98% for FAAS determination of Li. The recovery was from 98.00% to 101.00 by VS determination for Ag, the analysis results all meet the analysis requirement.

Determination of impurities in ultra-high purity aluminum by glow discharge mass spectrometry

Behavior of Impurity Elements in Pure Gadolinium During Ultra-High Purification

Determination Of Trace Elemental Inpurities In High Purity Trimethylgallium By Inductively Coupled Plasma-Atomic Emission Spectrometry

Highlights from Recent Literature

Development of a novel strategy for the quantification of ultra-trace impurity elements in high-purity magnesium using inductively coupled plasma tandem mass spectrometry

Research on the Removal of Impurity Elements During Ultra-High Purification Process of Terbium

Determination of Impurities in Magnesium Alloys by Inductively Coupled Plasma Mass Spectrometry

Elemental Imaging Method Based on a Dielectric Barrier Discharge Probe Coupled with Inductively Coupled Plasma Mass Spectrometry

Impurity distribution in preparation of high-purity aluminum by vacuum zone melting

Determination of aluminium in puffed food by graphite furnace atomic absorption spectrometry

Direct Determination of Impurities in High Purity Silicon Carbide by Inductively Coupled Plasma Optical Emission Spectrometry Using Slurry Nebulization Technique

On-line Electrolytic Dissolution of Alloys and Multi-Element Determination by Inductively Coupled Plasma Atomic Emission Spectrometry

Study on the separation and determination of colloidal aluminum and soluble aluminum by gel chromatography

High- and Ultra-High-Purity Aluminum, a Review on Technical Production Methodologies

Multiple Factors Influencing High-Purity Indium Electrolytic Refining

Mass spectrometry for glow discharge cleaning effect

The impurities distribution and purification efficiency of high-purity aluminum preparation by zone melting in vacuum

Study on the effective distribution coefficient of impurity separation in the preparation of high purity aluminum

Removal of Low-Content Impurities from Pure Al by Supergravity Combined with Semi-Solid Method

Discussion of Method for Aluminum Content Determination in Pop Can

[Pretreatment of Aluminum-Lithium Alloy Sample and Determination of Argentum and Lithium by Spectral Analysis]