Abstract:<p>The increasing demand of ultra-high purity aluminum for technological applications has triggered the improvement of purification methods during the recent decades. Some of the most relevant applications for ultra-high purity aluminum include electrolytic condensers, transistors, integrated circuit conductors, magnetic disks substrates and low-temperature superconducting magnets. The most commonly used industrial technique for refining high purity aluminum is the three-layer electrolytic process, reaching purification levels of up to 4N8 (99,998 wt.%). An alternative and less capital intensive method to achieve such purification level is fractional crystallization. While the three-layer electrolytic process remains almost unchanged among its proprietaries, the fractional solidification processes vary considerably on their techniques and setups used to achieve an efficient segregation of impurities from the base metal. The purpose of this article is to compare the cooled finger and zone melting, two existing fractional crystallization methods, available at the Institut für Metallurgische Prozesstechnik und Metallrecycling (IME) of the RWTH Aachen University. The purification effect caused by different types of convection from these two fractional crystallization techniques was experimentally shown and the common characteristics among fractional crystallization equipment; i.e. growth rate, thermal gradient and purification rate, were investigated. The competitive advantage of the cooled finger over zone melting was demonstrated. Although both techniques are capable of refining aluminum, the design of the cooled finger favors a better impurity segregation.</p>

The impurities distribution and purification efficiency of high-purity aluminum preparation by zone melting in vacuum

Impurity distribution in preparation of high-purity aluminum by vacuum zone melting

Study on the effective distribution coefficient of impurity separation in the preparation of high purity aluminum

Zone melting under vacuum purification method for high-purity aluminum

A method of further purification of zone-refined aluminum by cold-crucible levitation melting in ultra-high vacuum

Melt refining and purification processes in Al alloys: a comprehensive study

High- and Ultra-High-Purity Aluminum, a Review on Technical Production Methodologies

Purification Technology of Molten Aluminum

Alternative fractional crystallization-based methods to produce high-purity aluminum

Removal of Low-Content Impurities from Pure Al by Supergravity Combined with Semi-Solid Method

Research Advance in Removal of Impurity Si from Molten Al and Al Alloys

Preparation of High-Purity Tin by Zone Melting

Impurity Behavior in Aluminum Extraction by Low-Temperature Molten Salt Electrolysis

A qualitative and quantitative investigation of nonmetallic inclusions in molten Al–Mg, Al–Cu, and Al–Zn–Mg–Cu alloys

Production of High Purity Metals: A Review on Zone Refining Process

Separation behavior of trace impurities during deep purification of zone-fused germanium tailings via vacuum distillation

The Purification of ZL114A Alloy by Means of Bubble Floatation

Multiphase Modelling of the Continuous Metallurgical Purification Process for Impurity Removing of Recycled Aluminum

The Separation Behavior of Impurities in the Purification of High-Purity Magnesium via Vacuum Distillation

Technology of Purification Degassing Used in Aluminum Melt

Preparation of Highly Perfect Aluminum Crystal by Cold-Crucible Induction Melting in Ultra-high Vacuum