Abstract:<p>The increasing demand of ultra-high purity aluminum for technological applications has triggered the improvement of purification methods during the recent decades. Some of the most relevant applications for ultra-high purity aluminum include electrolytic condensers, transistors, integrated circuit conductors, magnetic disks substrates and low-temperature superconducting magnets. The most commonly used industrial technique for refining high purity aluminum is the three-layer electrolytic process, reaching purification levels of up to 4N8 (99,998 wt.%). An alternative and less capital intensive method to achieve such purification level is fractional crystallization. While the three-layer electrolytic process remains almost unchanged among its proprietaries, the fractional solidification processes vary considerably on their techniques and setups used to achieve an efficient segregation of impurities from the base metal. The purpose of this article is to compare the cooled finger and zone melting, two existing fractional crystallization methods, available at the Institut für Metallurgische Prozesstechnik und Metallrecycling (IME) of the RWTH Aachen University. The purification effect caused by different types of convection from these two fractional crystallization techniques was experimentally shown and the common characteristics among fractional crystallization equipment; i.e. growth rate, thermal gradient and purification rate, were investigated. The competitive advantage of the cooled finger over zone melting was demonstrated. Although both techniques are capable of refining aluminum, the design of the cooled finger favors a better impurity segregation.</p>

A method of further purification of zone-refined aluminum by cold-crucible levitation melting in ultra-high vacuum

The impurities distribution and purification efficiency of high-purity aluminum preparation by zone melting in vacuum

Impurity distribution in preparation of high-purity aluminum by vacuum zone melting

Preparation of Highly Perfect Aluminum Crystal by Cold-Crucible Induction Melting in Ultra-high Vacuum

Alternative fractional crystallization-based methods to produce high-purity aluminum

Removal of Low-Content Impurities from Pure Al by Supergravity Combined with Semi-Solid Method

Zone melting under vacuum purification method for high-purity aluminum

Purification Technology of Molten Aluminum

Static Crystallization, an Alternative Methodology for Synthesis of High-Purity Aluminum

Advanced Design and Optimization of Tailored Refining Fluxes for the Purification of Mg-Li Alloys

A Novel Method to Remove Iron Impurity from Aluminum

Study on the effective distribution coefficient of impurity separation in the preparation of high purity aluminum

Effect of Process Parameter Variation on Purity during Rotary Fractional Crystallization of Aluminum

Effect of New Flux on the Purification of A356 Aluminum Alloy

Melt refining and purification processes in Al alloys: a comprehensive study

Purification Effects of C 2 Cl 6 on A00 Aluminum

Innovative vacuum distillation technology for preparing refined Al from Al–Mg alloy

Impurity Behavior in Aluminum Extraction by Low-Temperature Molten Salt Electrolysis

A new process for efficient purification of 6061 aluminum alloy scrap under semi-solid and super-gravity conditions

Feasibility of Employing the Cooled Finger, a Fractional Crystallization Method for the Purification of Magnesium