Abstract:Highlights • Multiple iron-rich phases in a HPDC AlSi10MnMg alloy is studied. • (P-IMC) I exhibits a lateral growth characteristic with a termination of {1 1 0}. • High density stacking fault exhibits in β phase. • (P-IMC) I and plate-shaped iron-rich phase exhibit a difference in mechanical behavior. The characterization of multiple iron-rich phases in high-pressure die-cast AlSi10MnMg alloy was studied. Attention was focused on the formation and fracture behavior of the primary iron-rich phase ((P-IMC) I ) formed in the shot sleeve and plate-shaped eutectic iron-rich phase in high-pressure die cast (HPDC) AlSi10MnMg alloy. Results show that multiple types of iron-rich phases with various morphologies, including primary iron-rich phases (polyhedral (P-IMC) I and (P-IMC) II ) and eutectic iron-rich phases (plate-shaped, net shape, and fish-bone shape), were found in HPDC AlSi10MnMg. Coarse (P-IMC) I formed in the shot sleeve were distributed in the interface between primary α-Al and binary Al-Si eutectic. Small size (P-IMC) II and various eutectic iron-rich phases formed in the die cavity and they were distributed in Al-Si binary eutectic. The primary iron-rich phases belonged to a simple cubic crystal structure with a lattice constant a = 1.265 nmand they exhibited a lateral growth characteristic with a termination of {110} surface along a (P-IMC) II [ 1 ̄ 1 2 ̄ ] direction. β phase was surrounded by δ phase and they coexisted in a plate-shaped iron-rich phase. High-density stacking fault in β phase and δ/β interface provided an excellent nucleation site for δ phase. From mechanical behavior, the stress concentration caused by eutectic iron-rich phases was far less than (P-IMC) I and it would not cause crack initiation along the eutectic cluster boundary. In addition, (P-IMC) I showed the worst deformation coordination with primary α-Al while the plate-shaped eutectic iron-rich phase exhibited similar deformation characteristics with silicon particles.

On the characterization of primary iron-rich phase in a high-pressure die-cast hypoeutectic Al-Si alloy

The Microstructure characteristics and fracture behavior of the polyhedral primary iron-rich phase and plate-shaped eutectic iron-rich phase in a high-pressure die-cast AlSi10MnMg alloy

The characterization of Fe-rich phases in a high-pressure die cast hypoeutectic aluminum-silicon alloy

Characterization of high-pressure die-cast hypereutectic Al-Si alloys based on microstructural distribution and fracture morphology

Characteristics of Fe-rich Intermetallics Compounds and Their Influence on the Cracking Behavior of a Newly Developed High-Pressure Die Cast Al–4Mg–2Fe Alloy

Investigation on microstructure heterogeneity of the HPDC AlSiMgMnCu alloy through 3D electron microscopy

On the characterization of microstructure and fracture in a high-pressure die-casting Al-10 <i>wt</i>%Si alloy

Morphology Transition of the Primary Silicon Particles in a Hypereutectic A390 Alloy in High Pressure Die Casting

Iron-rich intermetallic phases and their role in casting defect formation in hypoeutectic Al-Si alloys

On the Formation Mechanism of the Ring-Like Microstructure of High-Pressure Die-Cast A390 Alloy

The characterization of porosity and externally solidified crystals in a high pressure die casting hypoeutectic Al-Si alloy using a newly developed ceramic shot sleeve

Microstructure Evolution of Primary Si Phase in Hypereutectic Al-20Si Alloys Prepared by Centrifugal Casting under an Electromagnetic Field

Characterization of externally solidified crystals in a high-pressure die-cast AlSi10MnMg alloy and their effect on porosities and mechanical properties

Effect of shot speeds on the microstructural framework and abnormal eutectic bands in a high pressure die casting hypoeutectic AlSi10MnMg alloy

Clustering Characteristics of Fe-rich Intermetallics in High Vacuum Die Cast AlSiMgMn Alloys with High Resolution Μ-Ct Inspection

3-D Microstructural Distribution and Mechanical Analysis of HPDC Hypereutectic Al-Si Alloys via X-Ray Tomography

Solidification Behaviors and Microstructure Morphology of Iron Phase in Al-Si Alloys with Higher Iron Content

Hexagonal Iron Phase Study in Aluminum-Silicon Alloy

Multi-scale iron-rich phases induce fine microstructures in Al-Zn-Mg-Cu-Fe alloys

Synchrotron X-ray tomography investigation of 3D morphology of intermetallic phases and pores and their effect on the mechanical properties of cast Al-Cu alloys

Secondary Phases in AlxCoCrFeNi High-Entropy Alloys: an In-Situ TEM Heating Study and Thermodynamic Appraisal