Abstract:Two single-ended wideband LNAs for ultrawide-band receiver have been designed and implemented in 0.18 /spl mu/m CMOS technology. The first one, a feed-back LNA, is a two-stage amplifier with a improved feedback loop, which provides high gain and enables the input port to match with 50/spl Omega/ in a wide frequency range from 500MHz to 8GHz. The second one, an LC low-pass-filter matched LNA, employs a third-order low pass filter in the input port to match a frequency range from 3GHz to 8GHz. In both of the LNAs, the input stage is a common source amplifier. Inductive shunt peaking is used for maximizing the bandwidth and flatting the gain. In the feed-back LNA, measurements show that the maximum gain is 11.5dB, the 3-dB bandwidth is from 500MHz to 7GHz, 11P3 is -2.2dBm at 4GHz, the minimum noise figure is around 5.7dB, SI 1 is less than -8.2dB, and the power consumption is 14mW. In the LC filter matched LNA, the 3-dB bandwidth is from 3GHz to 7.3GHz. The maximum gain is 9.6dB, IIP3 is 0dBm at 4 GHz, the minimum noise figure is 7.6dB, S11 is less than - 13.4dB and the power consumption is 23mW.

The Ultra-Wideband 0.5-15GHz LNA for Reconfigurable Receiver System in 28 nm CMOS

Analysis and Design of Ultra-Wideband Low-Noise Amplifier with Input/Output Bandwidth Optimization and Single-Ended/Differential-Input Reconfigurability.

A Sub-GHz Low-Power Receiver Employing Resistive-Feedback-Tuned LNA with 2.1-Db NF and 106-Db Gain Tuning Range

0.9–10GHz low noise amplifier with capacitive cross coupling

A fully-integrated low-power 3.1-10.6GHz UWB LNA in 0.18μm CMOS

A 22-40.5 GHz UWB LNA Design in 0.15um GaAs.

A 2.4 mW, 11.7±0.4dB, 3 to 5 GHz wide-band LNA for super-regenerative IR-UWB receiver

Design of Ultra-Wideband LNA with 3.6 ± 0.4 Db NF and 15.9 ± 1.1 Db Gain

A 0.08&#x2013;3ghz High Gain UWB LNA with Improved Flatness

A 0.18 μm CMOS 3–5GHz switched gain low noise amplifier for UWB system

Broadband CMOS LNAs for IR-UWB Receiver

3-10 GHz Ultra-Wideband LNA with Continuously Variable Gain for Wireless Communication

A Low Power High Gain UWB LNA in 0.18-Μm CMOS

Low Power 0.18µm CMOS Ultra Wideband Inductor-Less LNA Design for UWB Receiver

Low Power 0.18&#x00b5;m CMOS Ultra Wideband Inductor-Less LNA Design for UWB Receiver

A Novel CMOS Low-Noise Amplifier Design for 3.1- to 10.6-Ghz Ultra-Wide-band Wireless Receivers

3–10 GHz, 6.54‐mw CMOS Ultrawideband Low‐noise Amplifier Using a Hybrid Structure

A 4.7-to-18-ghz Ultra-Wideband Variable-Gain Balun-LNA Using 3 Rd -Order-band-pass Input Matching in 40-Nm CMOS.

A 3-10 Ghz Uwb Lna Using G(M)-Boosting Structure And Inductive-Peaking-Based Bandwidth Extension Technique In A 180 Nm Cmos Technology

A 6-7 GHz, 40 Db Receiver RF Front-End with 4.5 Db Minimum Noise Figure in 0.13μm CMOS for IR-UWB Applications

1.8-V 3.1-10.6-GHz CMOS low-noise amplifier for ultra-wideband applications

The Ultra-Wideband 0.5-15GHz LNA for Reconfigurable Receiver System in 28 nm CMOS

Analysis and Design of Ultra-Wideband Low-Noise Amplifier with Input/Output Bandwidth Optimization and Single-Ended/Differential-Input Reconfigurability.

A Sub-GHz Low-Power Receiver Employing Resistive-Feedback-Tuned LNA with 2.1-Db NF and 106-Db Gain Tuning Range

0.9–10GHz low noise amplifier with capacitive cross coupling

A fully-integrated low-power 3.1-10.6GHz UWB LNA in 0.18μm CMOS

A 22-40.5 GHz UWB LNA Design in 0.15um GaAs.

A 2.4 mW, 11.7±0.4dB, 3 to 5 GHz wide-band LNA for super-regenerative IR-UWB receiver

Design of Ultra-Wideband LNA with 3.6 ± 0.4 Db NF and 15.9 ± 1.1 Db Gain

A 0.08&amp;#x2013;3ghz High Gain UWB LNA with Improved Flatness

A 0.18 μm CMOS 3–5GHz switched gain low noise amplifier for UWB system

Broadband CMOS LNAs for IR-UWB Receiver

3-10 GHz Ultra-Wideband LNA with Continuously Variable Gain for Wireless Communication

A Low Power High Gain UWB LNA in 0.18-Μm CMOS

Low Power 0.18µm CMOS Ultra Wideband Inductor-Less LNA Design for UWB Receiver

Low Power 0.18&amp;#x00b5;m CMOS Ultra Wideband Inductor-Less LNA Design for UWB Receiver

A Novel CMOS Low-Noise Amplifier Design for 3.1- to 10.6-Ghz Ultra-Wide-band Wireless Receivers

3–10 GHz, 6.54‐mw CMOS Ultrawideband Low‐noise Amplifier Using a Hybrid Structure

A 4.7-to-18-ghz Ultra-Wideband Variable-Gain Balun-LNA Using 3 Rd -Order-band-pass Input Matching in 40-Nm CMOS.

A 3-10 Ghz Uwb Lna Using G(M)-Boosting Structure And Inductive-Peaking-Based Bandwidth Extension Technique In A 180 Nm Cmos Technology

A 6-7 GHz, 40 Db Receiver RF Front-End with 4.5 Db Minimum Noise Figure in 0.13μm CMOS for IR-UWB Applications

1.8-V 3.1-10.6-GHz CMOS low-noise amplifier for ultra-wideband applications

A 0.08–3ghz High Gain UWB LNA with Improved Flatness

Low Power 0.18µm CMOS Ultra Wideband Inductor-Less LNA Design for UWB Receiver