Abstract:The state-of-the-art GMAW processes are those with dynamic feeding, branded as cold metal transfer (CMT) by one of the main developers/suppliers. The metal transfer occurs through the combined action of surface tension force and wire electrode pullback, which is synchronized with the electric current waveform. The forward and pullback movement are generated by a highly dynamic secondary feeder. This process is widely applied to join parts and is currently gaining attention in additive manufacturing, due to its high level of controllability over the metallic transfer and bead geometry. However, there is a lack of studies on the manipulation of the CMT waveform and its influence over the welding process, especially regarding the geometrical control of the deposition and its high stability. This research was focused on investigating the effect of current waveform manipulation on the CMT variant of the GMAW process. Experiments were carried out with two customized CMT waveforms. In case 1, a waveform with a current pulse in the short-circuit phase was used and in case 2, a similar waveform was used, with the same average power, but with no current pulse in the short-circuit phase. High-speed videography and electrical signals analysis revealed a greater striction effect of the metal bridge in case 1. In conclusion, the current waveform manipulation with CMT can not only improve stability but also the geometric aspect of the weld bead, while maintaining a similar power and thermal profile, highlighting the geometric characteristics that can be used for building parts via additive manufacturing.

Dynamic Analysis of the Ultrasonic-Frequency Pulsed GMAW Metal Transfer Process

An Image-Processing Method for Extracting Kinematic Characteristics of Droplets During Pulsed GMAW

Study on the Effect of Pulse Waveform Parameters on Droplet Transition, Dynamic Behavior of Weld Pool, and Weld Microstructure in P-GMAW

Dynamic Metal Transfer Behavior in Double-Wire DP-GMAW of Aluminum Alloy Under Different Pulse Phases

An investigation of metal transfer process in GMAW

The Influence of Coaxial Ultrasound on the Droplet Transfer of High Nitrogen Steel GMAW Process

Comparative Study of Droplet Transfer Modes on Appearance, Microstructure, and Mechanical Properties of Weld During Pulsed GMAW

Numerical investigation on the influence of current waveform on droplet transfer in pulsed gas metal arc welding

Investigation on the Dynamic Behavior of Weld Pool and Weld Microstructure During DP-GMAW for Austenitic Stainless Steel

3D Numerical Study of External Axial Magnetic Field-Controlled High-Current GMAW Metal Transfer Behavior

Current research status and prospect of metal transfer process control methods in gas metal arc welding

Measurement and calculation of plasma drag force in arc welding based on high-speed photography technology and particle dynamics

Effect of high-frequency phase shift on metal transfer and weld formation in aluminum alloy double-wire DP-GMAW

Droplet detachment and motion behaviors in laser-MIG hybrid welding of aluminum alloy

Study of the Mechanism of a Stable Deposited Height During GMAW-Based Additive Manufacturing

Power-arc model based adaptive arc length control of P-GMAW for Al–Mg alloy

Effective Control Approach on Molten Droplet Size in Waveform Controlled Short Circuit Co2 Arc Welding

Study on Short-Circuiting GMAW Pool Behavior and Microstructure of the Weld with Different Waveform Control Methods

Analysis of current pulse during short-circuit phase in CMT version of GMAW process under a view of additive manufacturing

Droplet Transfer Induced Keyhole Fluctuation and Its Influence Regulation on Porosity Rate during Hybrid Laser Arc Welding of Aluminum Alloys

Experimental measurement of fluid flow in high-speed GMAW assisted by transverse magnetic field