Abstract:This article presents an 18 similar to 30 GHz vector-sum phase shifter for wireless application in the millimeter-wave regime. It is composed of an I/Q signal generator, two variable-gain amplifiers (VGA), and a digital-to-analog converter with a quadrant selector. To attain wideband quadrature signal, a two-stage hybrid based on transformers is proposed to realize the I/Q signal generator. The first- and second-stage hybrids are designed with different resonating frequencies. As a result, the amplitude and phase errors of the I/Q signal generator are significantly decreased in a wide frequency band. In addition, theoretical analysis based on a simplified equivalent-circuit model is performed to guide the circuit implementation, and its correctness is demonstrated by electromagnetic simulation. To mitigate the impact of the VGAs' parasitics on the phase performance, a capacitive-neutralization technique is applied to cancel parasitics of transistors in the VGAs. A prototype circuit is designed using a 130-nm SiGe BiCMOS process. The measured results show that the circuit achieves a root-mean-square (RMS) amplitude error of less than 1.4 dB and an RMS phase error of 1.4 degrees similar to 3.4 degrees across 18 similar to 32 GHz. The tested peak gains of all the phase states are -1 similar to 4.5 dB with an input balun (approximate to 1.9 dB loss) and an output balun (approximate to 2 dB loss) at 22 GHz. Also, the input 1-dB compression point and noise figure are tested, which are >=-1 dBm and <= 15.5 dB in the targeting frequency band.

Design of a Wideband CMOS Digital Step Attenuator with High Accuracy and Low Phase Error

A DC-28-GHz 7-Bit High-Accuracy Digital-Step Attenuator in 55-nm CMOS

A DC-32GHz 7-Bit Passive Attenuator with Capacitive Compensation Bandwidth Extension Technique in 55 Nm CMOS

A DC-<i>Ka</i>-Band 7-Bit Passive Attenuator With Capacitive-Compensation-Based Bandwidth Extension Technique in 55-nm CMOS

Design Of A Low-Insertionphase-Shift Mmic Attenuator Integrated With A Serial-To-Parallel Converter

Design of a Wideband Compact CMOS Integrated Attenuator with Low Insertion Loss and High Accuracy

A wideband 6-bit Digital Attenuator with high accuracy in 65nm CMOS

Ultra-wideband amplitude-phase compensation digital switch attenuator circuit

An E-band Subradix Active Phase Shifter with < 0.69° RMS Phase Error and 16-Db Attenuation in 28-Nm CMOS

An Ultra Broadband DC-40GHz 4-Bit GaAs Phemt MMIC Digital Attenuator

A 25-35 GHz 5-Bit Digital Attenuator with Low RMS Amplitude Error and Low Phase Variation in 65 Nm CMOS.

A Wideband 6-Bit Phase Shifter with Low RMS Error in 65nm CMOS Technology

A 26-32Ghz Differential Attenuator with 0.23db RMS Attenuation Error and 11.2dbm IP1dB in 40nm CMOS Process

A Novel Ultra Broadband 8-45 GHz 4-Bit GaAs Pseudomorphic High Electron Mobility Transistors (phemt) Monolithic Digital Attenuator Used for Gain Control of Transceivers

A K-Band CMOS Standing Wave Oscillator Using Digital-Controlled Artificial Dielectric Differential Transmission Lines

A Ku-band 180° Phase Shifter with 2-Bit Attenuation Control Based on High-pass/low-pass Network

An Ultracompact DC–20-GHz Nmos-Based CMOS Attenuator

An 18 similar to 30 GHz Vector-Sum Phase Shifter With Two-Stage Transformer-Based Hybrid in 130-nm SiGe BiCMOS

The Seven-State RF MEMS Miniaturized Broadband Reconfigurable Step Attenuator

6-Bit CMOS Phase Shifter and Attenuator Based on Time-Modulation for Ku-band Phased Array Applications

Wideband Attenuators Using Distributed Resistors for Attenuation Up to 30 Db.