Abstract:Reconfigurable attenuators are widely used in microwave measurement instruments. Development of miniaturized attenuation devices with high precision and broadband performance is required for state-of-the-art applications. In this paper, a compact 3-bit microwave attenuator based on radio frequency micro-electro-mechanical system (RF MEMS) switches and polysilicon attenuation modules is presented. The device comprises 12 ohmic contact MEMS switches, p-type polysilicon resistive attenuation modules and microwave compensate structures. Special attention was paid to the design of the resistive network, compensate structures and system simulation. The device was fabricated using micromachining processes compatible with traditional integrated circuit fabrication processes. The reconfigurable attenuator integrated with RF MEMS switches and resistive attenuation modules was successfully fabricated with dimensions of 2.45 x 4.34 x 0.5 mm(3), which is 1/1000th of the size of a conventional step attenuator. The measured RF performance revealed that the attenuator provides 10-70 dB attenuation at 10 dB intervals from 0.1-20 GHz with an accuracy better than +/- 1.88 dB at 60 dB and an error of less than 2.22 dB at 10 dB. The return loss of each state of the 3-bit attenuator was better than 11.95 dB (VSWR < 1.71) over the entire operating band.

A Novel Ultra Broadband 8-45 GHz 4-Bit GaAs Pseudomorphic High Electron Mobility Transistors (phemt) Monolithic Digital Attenuator Used for Gain Control of Transceivers

An Ultra Broadband DC-40GHz 4-Bit GaAs Phemt MMIC Digital Attenuator

Design Of A Low-Insertionphase-Shift Mmic Attenuator Integrated With A Serial-To-Parallel Converter

A DC-28-GHz 7-Bit High-Accuracy Digital-Step Attenuator in 55-nm CMOS

Design of a Broadband Ka-band MMIC LNA Using Deep Negative Feedback Loop.

A DC-32GHz 7-Bit Passive Attenuator with Capacitive Compensation Bandwidth Extension Technique in 55 Nm CMOS

A 4 W K-Band Gaas Mmic Power Amplifier With 22 Db Gain

A 30Mhz-3Ghz 1W Stacked-Fet GaAs MMIC Power Amplifier.

A DC-<i>Ka</i>-Band 7-Bit Passive Attenuator With Capacitive-Compensation-Based Bandwidth Extension Technique in 55-nm CMOS

Ultra-wideband amplitude-phase compensation digital switch attenuator circuit

An Ultra Broadband Passive Vector Modulator Phase Shifter

A High-Efficiency K-band MMIC Linear Amplifier Using Diode Compensation

A CMOS 135–150 GHz 0.4 dBm EIRP transmitter with 5.1dB P1dB extension using IF envelope feed-forward gain compensation

A 25-35 GHz 5-Bit Digital Attenuator with Low RMS Amplitude Error and Low Phase Variation in 65 Nm CMOS.

A 26-32Ghz Differential Attenuator with 0.23db RMS Attenuation Error and 11.2dbm IP1dB in 40nm CMOS Process

A wideband 6-bit Digital Attenuator with high accuracy in 65nm CMOS

A Dc-20ghz Attenuator Design with Rf Mems Technologies and Distributed Attenuation Networks

Micromechanical Variable Optical Attenuator Based on EDM Micromachining

Digitally Controlled Programmable High‐speed Variable Optical Attenuator

A Miniaturized Reconfigurable Broadband Attenuator Based on RF MEMS Switches

A 7.5–9 GHz GaAs Two-Channel Multi-Function Chip