Abstract:Package lid and heat sink incorporated in PCB or chip package are often used for solving the heat dissipation problem, which is easy to form a resonant cavity with the metal ground plane of the package substrate, and consequently result in the noise current coupling to the package cover and heat sink through the capacitive effect, causing serious EMI problems, therefore, we propose a new resistive film-based super material absorber structure. In this paper, a unit of the proposed structure has resistive film patterns on the FR-4 substrate in front of the conductive plate, and the top layer uses Jerusalem cross, square and L-shaped resistive film to achieve bandwidth expansion. The unit size of the entire absorber is 0.15$\lambda_{L}\times 0.15\lambda_{L}(\lambda_{L}$ is the wavelength corresponding to the lowest cut-off frequency), while the thickness is only $0.07\lambda_{L}$. The simulation results show that the absorption rates are more than 90% in the frequency range from 22-40GHz. When the electromagnetic waves are perpendicular to the proposed resistive film absorber, it is insensitive to the polarization of TE and TM modes, and the absorption rates remain stable when the incident wave is wide-angle. Based on the equivalent medium theory, it is demonstrated that the structure achieves good impedance matching with free space in a wide frequency band. Meanwhile, the absorption mechanism of this structure is analyzed by the distribution of electric field and surface current, and the equivalent circuit model of resistive film absorber is established. The proposed resistive film absorber is characterized by miniaturization, ultra-wideband, high absorption rates, and insensitivity to polarization, providing a new idea for radiation suppression of highly integrated electronic devices.

Wideband Attenuators Using Distributed Resistors for Attenuation Up to 30 Db.

A DC-32GHz 7-Bit Passive Attenuator with Capacitive Compensation Bandwidth Extension Technique in 55 Nm CMOS

A Dc-20ghz Attenuator Design with Rf Mems Technologies and Distributed Attenuation Networks

Design Of Single Thin Film Resistor Network As 20db Attenuator For Dc-20ghz Application

A DC-<i>Ka</i>-Band 7-Bit Passive Attenuator With Capacitive-Compensation-Based Bandwidth Extension Technique in 55-nm CMOS

An Ultra Broadband DC-40GHz 4-Bit GaAs Phemt MMIC Digital Attenuator

Ultra-wideband amplitude-phase compensation digital switch attenuator circuit

Design of a Low-Insertion-phase-shift MMIC Attenuator Integrated with a Serial-to-parallel Converter

A DC-28-GHz 7-Bit High-Accuracy Digital-Step Attenuator in 55-nm CMOS

Design and fabrication of 12 dB microwave thin film attenuator

A Compact 2-18Ghz Ultra-Wideband Frequency-conversion T/R Module Based on a 3D Heterogeneous Integrated Process

Design of a Wideband Compact CMOS Integrated Attenuator with Low Insertion Loss and High Accuracy

A 25-35 GHz 5-Bit Digital Attenuator with Low RMS Amplitude Error and Low Phase Variation in 65 Nm CMOS.

A 26-32Ghz Differential Attenuator with 0.23db RMS Attenuation Error and 11.2dbm IP1dB in 40nm CMOS Process

A wideband 6-bit Digital Attenuator with high accuracy in 65nm CMOS

Attenuation Measurement of the Dielectric Rod Using Parallel Strips with a Resonable Field Environment

Linbo3 Based S-Bend Waveguide Variable Optical Attenuator

High Dynamic Range Attenuator Using ScDDAs as Integrated Distributed Tunable Resistors on Silicon

A Miniaturized Reconfigurable Broadband Attenuator Based on RF MEMS Switches

TDFA-BAND SILICON OPTICAL VARIABLE ATTENUATOR

A Miniaturized Ultra-wideband Resistive Film Absorber for Radiation Suppression