Abstract:Organic-inorganic halide perovskites have demonstrated great potential for photovoltaic applications owing to their unprecedented optoelectronic properties and low manufacturing costs. However, the commercialization of this technology is hindered by its thermal instability and inherent toxicity. In this study, SCAPS-1D simulation software was used to study the performance of solar cell based on CuAgBi2I8, which is a novel inorganic non-toxic lead-free perovskite-inspired material. Different electron transport layers (TiO2, In2S3, ZnO, Zn0.75Mg0.25O,SnO2 and SrTiO3) and hole transport layers (CuI, PEDOT:PSS, CuSCN and Cu2O) were studied, our research indicated that SnO2 and NiO formed the optimal combination. Further analysis revealed that the optimal absorption layer thickness was 900 nm, the absorption layer doping concentration should be less than 1 × 1013 cm-3 and the defect density should be less than 1 × 1014 cm-3. The optimal thickness of SnO2 and NiO was 30 nm, the optimal doping concentration of SnO2 and NiO was 1 × 1020 cm-3, the defect density of absorber layer/SnO2 and absorber layer/NiO interfaces should be less than 1×1012 cm-3, C was the optimal back electrode material. Consequently, the optimal device configuration was identified as FTO/SnO2/CuAgBi2I8/NiO/C, the efficiency was improved from original 2.76% to 19.10% after above optimization. These results indicate that solar cell with CuAgBi2I8 as the absorber layer is a potential alternative to organic-inorganic lead halide perovskite solar cells.

A Low Cost and Nontoxic Absorber for Intermediate Band Solar Cell Based on P-doped Cu2SiS3: A First-Principles Study

First-principles Study on Sb-doped SnS2 As a Low Cost and Non-Toxic Absorber for Intermediate Band Solar Cell

Intermediate Band Insertion by Group-Iiia Elements Alloying in a Low Cost Solar Cell Absorber CuYSe2: A First-Principles Study

Theoretical Design of the Absorber for Intermediate Band Solar Cells from Group‐IV (si, Ge, and Sn)‐Doped AgAlSe2

Theoretical Optimization of an Earth-Abundant and Environmentally Friendly Photovoltaic Absorber Cu3PSe4 from First-Principles Study to Device Simulation

CuSbS2 As a Promising Earth-Abundant Photovoltaic Absorber Material: A Combined Theoretical and Experimental Study

Si3AlP: A new promising material for solar cell absorber

Low-cost Fabrication of Cu 2 ZnSnS 4 Thin Films for Solar Cell Absorber Layers

Group-Iv (si, Ge, and Sn)-Doped Agalte2 for Intermediate Band Solar Cell from First-Principles Study

Theoretical Optimization of an Earth-Abundant and Environmentally Friendly Photovoltaic Absorber Cu 3 PSe 4 from First-Principles Study to Device Simulation

CuSbSe2 As a Potential Photovoltaic Absorber Material: Studies from Theory to Experiment

Electronic structure, defect properties, and optimization of band gap of the earth-abundant and low-toxicity photovoltaic absorber Cu3SbS4

Inserting an Intermediate Band in Cu- and Ag-based Kesterite Compounds by Sb Doping: A First-Principles Study

Optimization of preparation conditions and design of device configurations for Cu3AsS4 solar cells: a combined study of first-principles calculations and SCAPS-1D device simulations

Bournonite CuPbSbS3: an Electronically-3D, Defect-Tolerant, and Solution-Processable Semiconductor for Efficient Solar Cells

Electronic Structure, Defect Properties, and Optimization of the Band Gap of the Earth-Abundant and Low-Toxicity Photovoltaic Absorber Cu3SbS4.

NaSbSe2 As a Promising Light-Absorber Semiconductor in Solar Cells: First-principles Insights

Transition metals doped CuAlSe2 for promising intermediate band materials

Design and performance exploration of Pb-free low-cost all-inorganic perovskite-inspired CuAgBi2I8 solar cells: Theoretical approach

A hybrid density functional design of intermediate band semiconductor for photovoltaic application based on group IV elements (Si, Ge, Sn, and Pb)-doped CdIn<sub>2</sub>S<sub>4</sub>