Abstract:In recent years, Cu2ZnSn(S,Se)4 (CZTSSe) materials have enabled important progress in associated thin‐film photovoltaic (PV) technology, while avoiding scarce and/or toxic metals; however, cationic disorder and associated band tailing fundamentally limit device performance. Cu2BaSnS4 (CBTS) has recently been proposed as a prospective alternative large bandgap (~2 eV), environmentally friendly PV material, with ~2% power conversion efficiency (PCE) already demonstrated in corresponding devices. In this study, a two‐step process (i.e., precursor sputter deposition followed by successive sulfurization/selenization) yields high‐quality nominally pinhole‐free films with large (>1 µm) grains of selenium‐incorporated (x = 3) Cu2BaSnS4−xSex (CBTSSe) for high‐efficiency PV devices. By incorporating Se in the sulfide film, absorber layers with 1.55 eV bandgap, ideal for single‐junction PV, have been achieved within the CBTSSe trigonal structural family. The abrupt transition in quantum efficiency data for wavelengths above the absorption edge, coupled with a strong sharp photoluminescence feature, confirms the relative absence of band tailing in CBTSSe compared to CZTSSe. For the first time, by combining bandgap tuning with an air‐annealing step, a CBTSSe‐based PV device with 5.2% PCE (total area 0.425 cm2) is reported, >2.5× better than the previous champion pure sulfide device. These results suggest substantial promise for the emerging Se‐rich Cu2BaSnS4–xSex family for high‐efficiency and earth‐abundant PV.

CuSbS2 As a Promising Earth-Abundant Photovoltaic Absorber Material: A Combined Theoretical and Experimental Study

CuSbSe2 As a Potential Photovoltaic Absorber Material: Studies from Theory to Experiment

Electronic structure, defect properties, and optimization of band gap of the earth-abundant and low-toxicity photovoltaic absorber Cu3SbS4

Electronic Structure, Defect Properties, and Optimization of the Band Gap of the Earth-Abundant and Low-Toxicity Photovoltaic Absorber Cu3SbS4.

Synthesis and Characterization of Hydrazine Solution Processed Cu12Sb4S13 Film

CuSbS<sub>2</sub>: a promising semiconductor photo-absorber material for quantum dot sensitized solar cells

Preparation and Characterization of Cuins2 Thin Films for Solar Cells by Chemical Bath Deposition

BaCu2Sn(S,Se)4: Earth-Abundant Chalcogenides for Thin-Film Photovoltaics

Theoretical Optimization of an Earth-Abundant and Environmentally Friendly Photovoltaic Absorber Cu3PSe4 from First-Principles Study to Device Simulation

Bournonite CuPbSbS3: an Electronically-3D, Defect-Tolerant, and Solution-Processable Semiconductor for Efficient Solar Cells

First-principles insights into the electronic structure, optical and band alignment properties of earth-abundant Cu2SrSnS4 solar absorber

Recent progress in the research on using CuSbS<sub>2</sub> and its derivative CuPbSbS<sub>3</sub> as absorbers in case of photovoltaic devices

Two-stage co-evaporated CuSbS2 thin films for solar cells

Reactive Close-Spaced Sublimation Processed CuSbSe2 Thin Films and Their Photovoltaic Application

Thin film solar cells based on Ag-substituted CuSbS2 absorber

Thin-Film Solar Cells Based on Selenized CuSbS2 Absorber

Solution-processed CuSbS 2 Solar Cells Based on Metal–organic Molecular Solution Precursors

Scalable and efficient Sb2S3 thin-film solar cells fabricated by close space sublimation

STUDIES ON STRUCTURAL, OPTICAL AND ELECTRICAL PROPERTIES OF CuSbS2 NANOPARTICLES

Earth-Abundant Chalcogenide Photovoltaic Devices with over 5% Efficiency Based on a Cu2 BaSn(S,Se)4 Absorber.