Abstract:The formation process of Al3Ti was studied based on the in-situ reaction between globular solid Ti powders with almost uniform size and 2024 Al melt under ultrasonic vibration. The microstructures of the Al3Ti/Al composite were examined at different reaction time. The reaction mechanism was analyzed based on the phase diagram and empirical reaction kinetics. Moreover, the effects of ultrasonic vibration on the formation of Al3Ti were discussed. The results show that the Al3Ti formed a layer around the unreacted Ti particle and was ruptured as the reaction continuing. An empirical reaction kinetics model of in-situ Al3Ti was established. The kinetic exponent n is determined to be 0.86, which is much higher than that of the standard diffusion-controlled growth (n = 0.5). The ultrasound assisted reaction follows an interface-controlled growth which means a higher reaction rate. The comprehensive effects of instantaneous pressure, high-intensity shock waves and local high-temperature caused by acoustic streaming and cavitation, are responsible for the high reaction rate and fine Al3Ti particles during the reaction process under ultrasonic vibration. (C) 2015 Elsevier B.V. All rights reserved.

Low-temperature Synthesis of Nano-Sized TiC Particles by Ultrasound Assisted Melt-Reaction of Al-K2TiF6-C System

Ultrasound Assisted Combustion Synthesis of TiC in Al–Ti–C System

Ultrasound assisted salts–metal reaction for synthesizing TiB2 particles at low temperature

Low-temperature Synthesis of TiB2 Nanocrystals Using TiO2 ,LiBH4 and Mg

Synthesis of Submicrometer-Sized TiC Particles in Aluminum Melt at Low Melting Temperature

Sonochemical Combustion Synthesis of Purer Ti2AlC from Ti–Al–C System

In-situ Synthesis of Nanocrystalline TiC Powders, Nanorods, and Nanosheets in Molten Salt by Disproportionation Reaction of Ti(II) Species

Ultrasound-induced Distribution of Nano-Sized TiB2 Particles Within Α-Al Grains During Solidification of Al-7Si Alloy

Structural and Hydrophilic Properties of TiN Films Prepared by Ultrasonic Atomization Assisted Spray Method under Low Temperature

Low‐temperature Synthesis of Ultrafine TiB2 Nanopowders by Molten‐salt Assisted Borothermal Reduction

Formation Of Nanocrystalline Tic By A Low-Temperature Route

Fabrication of in situ Al3Ti/Al composites by using ultrasound assisted direct reaction between solid Ti powders and liquid Al

Preparation of titanium carbide powders by sol–gel and microwave carbothermal reduction methods at low temperature

The co-reduction route to TiC nanocrystallites at low temperature

A novel simple method to stably synthesize Ti3AlC2 powder with high purity

Study of formation behavior of TiC ceramic obtained by self-propagating high-temperature synthesis from Al–Ti–C elemental powders

Mechanically Activated Low-Temperature Synthesis of Ti2snc

Formation of In-Situ Al3Ti Particles from Globular Ti Powders and Al Alloy Melt under Ultrasonic Vibration

A Low-Temperature in Situ Template Reduction-Carbonization Route to Tic Submicrometer Hollow Spheres and Nanorods

Ultrasound Induced a More Homogeneous Distribution of TiB2 Particles in Al Matrix During Solidification

Effect of Ultrasonic Vibration on Direct Reaction Between Solid Ti Powders and Liquid Al