Abstract:The mechanical properties of Czochralski (Cz) silicon wafers dictate fundamental limits on the fabrication of diverse electronic devices. Certain impurities with sufficiently high concentrations may affect the mechanical properties of Cz silicon. The underlying mechanisms for such influences have been being explored in the past decades. In this work, the effects of antimony (Sb)- and tin (Sn)-doping at 1018 cm−3 level on the mechanical properties of Czochralski (Cz) silicon have been comparatively investigated. Since Sb and Sn have quite close tetrahedral covalent radii in silicon, the lattice strains resulted from Sb- and Sn-doping and their consequent effects on the mechanical properties of silicon are approximately identical. In silicon, Sb is an electrically active impurity while Sn is a neutral one. Therefore, the present work can essentially reveal the role of electrical activity of Sb playing in the mechanical properties of Cz silicon. It is found that Sb-doped Cz (Sb-Cz) silicon possesses a slightly higher hardness than Sn-doped Cz (Sn-Cz) silicon. Moreover, the dislocation gliding at 500 or 600 °C in Sb-Cz silicon requires a much larger critical resolved shear stress than that in Sn-Cz silicon. At such two temperatures, Sb-Cz silicon remains to be n-type in electrical conduction. The aforementioned two results are believed to be ascribed to the resistance of dislocation motion by the Coulomb interaction between the positively charged Sb ions and the dislocations that are deep-level acceptors thus being negatively charged in Sb-Cz silicon. As the temperature is increased to 700 °C and above, the dislocation gliding in Sb-Cz silicon is not substantially different from that in Sn-Cz silicon. At such elevated temperatures, Sb-Cz silicon becomes intrinsic in electrical conduction like Sn-Cz silicon. In this context, there is no Coulomb interaction between Sb ions and dislocations anymore to impede the dislocation gliding in Sb-Cz silicon. In addition, it is found that the indentation fracture toughness of Sb-Cz is almost the same as that of Sn-Cz silicon. Actually, the fracture of silicon is essentially a cleavage process, to which the electrical activity of Sb is irrelevant.

Study on the influence of doping process on resistance of semiconductor bridge region

Implementation Of Temperature Dependent Contact Resistance Model For The Analysis Of Deep Submicron Devices Under Esd

Transient Scanning Electron Beam Annealing Methods Used to Study Diffusion and Defects in Implanted Silicon

A Study of Diffusion, Clustering and Defects in As+ and Bf2+ Implanted Silicon During Scanning Electron Beam Annealing.

Effects of Antimony- and Tin-Doping on the Mechanical Propertiesof Czochralski Silicon: Revealing the Role of Electrical Activity of Antimony

Investigation of the Doping Profile for Ion Implants and Rapid Annealing in Silicon Via an Improved Method

Implantation-dominated Junction Depths of Low-Temperature and Electron-Beam-annealed As Source—drain Regions

Influence of In-Situ Arsenic Doped Emitter Poly Process Conditions on RF-BiCMOS Device Parametrics

Scanning Infrared Microscopy Study of Thermal Processing Induced Defects in Low Resistivity Si Wafers

Impact of TSV Induced Thermo-Mechanical Stress on Semiconductor Device Performance

Variation of Schottky Barrier Height Induced by Dopant Segregation Monitored by Contact Resistivity Measurements

A Multiscale Simulation on Aluminum Ion Implantation-Induced Defects in 4H-SiC MOSFETs

Effects of On-State Resistance Temperature Effect on the Static Current Balancing Capability of SiC MOSFET Power Module

Generalized Thermal Design Model for Comb-Capacitor Mems Devices Fabricated by Bonding-Drie Process: A Preliminary Framework

Thermal Conductivity Measurements of Ultra-Thin Single Crystal Silicon Films Using Improved Structure

Influence of Asymmetric Contact Form on Contact Resistance and Schottky Barrier, and Corresponding Applications of Diode

Enhancing and Mapping Thermal Boundary Conductance across Bonded Si/SiC Interface

Thermalization Effect in semiconductor Si, and metallic silicide NiSi2, CoSi2 by using Non-Adiabatic Molecular Dynamics Approach

Thermal Boundary Conductance Enhancement of the Si/Diamond Interface via Atomic Transition Strategy

Optimization and Fabrication of MEMS suspended structures for nanoscale thermoelectric devices

Processes-based Multistep Simulation of Thermal- mechanical Reliability of a 3D-TSV MEMS