Abstract:It is usually to conduct a full-scale three-dimensional flow analysis for a radial turbine to find a way to increase the efficiency of a Compressed Air Energy Storage (CAES) system. However, long solving time and huge consumption of computing resources become a major obstacle to the analysis. Therefore, in present study, a surrogate model with test data-based multi-layer perceptron (MLP) Neural Network is proposed to overcome the difficulty. Instead of complex flow field solving process, it provides reliable turbine aerodynamic performance and flow field distribution characteristics in a short solution time by "learning the measurement results". The validation results illustrated that the predicted maximum relative errors of isentropic efficiency, corrected mass flow rate and corrected power are only 0.03%, 0.22% and 0.26% respectively. The predicted flow distribution parameters in chamber, shroud cavity and outlet region of rotor are also basically consistent with the experimental results. In the chamber, it can be found that a pressure stagnation point is observed at circumferential angle of 270° when total pressure ratio is decreased. In the shroud cavity, obvious pressure variation is found near outlet of shroud cavity which although labyrinth seals exist. At outlet of rotor, obvious variations of velocity and pressure are found in the 0.0–0.4 and 0.6–0.8 of blade height. At the same time, obvious variations of velocity and pressure are found in the 0.0–0.4 and 0.6–0.8 of blade height and this is because the influence of upper passage vortex, lower passage vortex and end wall secondary flow. The present study can provide further reference for the dynamic performance evaluation of CAES radial inflow turbine.

Predicting Airflow Distribution in A Radially Air-Cooled Generator by Flow Network Method

Improving Combined Flow and Thermal Network Accuracy for Radially Air-Cooled Generators by Considering the Nonlinear Resistance Characteristics of T-Junction Flow

Numerical Investigation of the Impact of Wind Turbine Rotor on the Passive Cooler above Nacelle

Three-dimensional Numerical Simulation of the Internal Flow in the Centrifugal Fan

Optimal Analysis on Temperature Field of Stator Ventilation System Based on Longitudinal Vortex Generator

The Numerical Analysis Of Ventilation And Temperature Fields For A Bulb Tubular Turbine Generator

Numerical simulation of internal flow in forward-curved centrifugal fan

Numerical Calculation of Fluid Heat Transfer in Rotor of Large Air-cooled Generator Based on Global Ventilation Network Model

Influence of the turbulence model on the numerical predictions of cold turbulent flow in a heavy-duty gas turbine DLN combustor

Coupled Airflow-thermal Network Model for Large-scale Offshore Wind Generators with Modular Fractional-slot Concentrated Winding

Simulation Study on Closed-circuit Ventilation System of Large Vertical Hydraulic Turbine Generator

Evaluation of fast fluid dynamics with different turbulence models for predicting outdoor airflow and pollutant dispersion

A Novel Model for CFD-Based Throughflow Analysis of Film-Cooled Turbine Blade

A Surrogate Model for a CAES Radial Inflow Turbine with Test Data-Based MLP Neural Network Algorithm

Heat transfer coefficient distribution in inner surface of stator ventilation duct for large capacity air-cooled turbine generator

CFD simulation and investigation on flow field characteristics and temperature predictions of an electric generator unit

A Comparative Study on Coupled Fluid–Thermal Field of a Large Nuclear Turbine Generator with Radial and Composited Radial–Axial–Radial Ventilation Systems

Investigating flow and heat transfer characteristics in a fuel bundle with split-vane pair grids by CFD methodology

A novel entrainment wind farm flow model for power prediction

Flow and heat transfer optimization of a fin-tube heat exchanger with vortex generators using Response Surface Methodology and Artificial Neural Network

Study of Draft Tube Optimization Using a Neural Network Surrogate Model for Micro-Francis Turbines Utilized in the Water Supply System of High-Rise Buildings