Abstract:GDI engine has gained much popularity in vehicle market with its high thermal efficiency. However, because of higher particulate emissions, it becomes harder for GDI engines to fulfill the iteration of emission regulations in various countries. As a result, Gasoline Particulate Filter (GPF) has received more and more attention and applications. It is important to study the particulate emission and GPF performance especially for transient cycles. With a self-designed test bench with burner named Exhaust Gas Simulator, a transient control strategy to simulate the exhaust state of the WLTC cycle has been developed and achieved a fast and stable ash accumulation rate. Three levels of ash loading, in terms of 0g/L, 5g/L and 35g/L, were accumulated on respective GPF for different aging degrees with this test bench. The effect of ash loading on GPF performance was investigated. A Cambustion DMS500 was used to record the particulate emission before and after the GPFs, and then the particulate size distribution, collection efficiency of GPF were analyzed. The results show that with this test bench and control strategy, an ash accumulation rate of 5g/L can be achieved. In terms of particulate size distribution, particulate concentration before and after GPF mainly presents a bimodal distribution. The first peak is mainly composed of nucleation mode particles, and the second peak is mainly composed of accumulation mode particles. In terms of GPF collection efficiency, the average collection efficiency of GPF measured in the three groups is above 99% for particulates of various sizes ranging from 5 to 1000nm. In terms of average particulate size before and after GPF collection, the collection efficiency of fresh and slightly aged GPF for small-size particulates (5-20nm) is higher than that of large-size particulates (larger than 20nm). However, the GPF with higher aging degree has a higher collection efficiency for large -size particulates (larger than 20nm) than small-size particulates (5-20nm).

Investigations on the Soot Combustion Performance Enhancement of an Improved Catalytic Gasoline Particulate Filter Regeneration System under Different Electric Heating Powers

Effects analysis on soot combustion performance enhancement of an improved catalytic gasoline particulate filter regeneration system with electric heating

An Assessment of the Application of Catalyst Preheating Prior to Engine Cold Start to Improve the Filtration Performance of CDPF on Particulate Emissions

Investigations on a new C-GPFs with electric heating for enhancing the integrated regeneration performance under critical parameters

Investigations on the Soot Combustion Performance Enhancement of a Catalytic Gasoline Particulate Filter in Equilibrium State for Reducing the BSFC of Gasoline Direct Injection Engine

Numerical Analysis on a Novel CGPFs for Improving NOx Conversion Efficiency and Particulate Combustion Efficiency to Reduce Exhaust Pollutant Emissions

Effects of Structural Optimization Design of Gasoline Particulate Filter on Soot Emission and Performance of GDI Engine

Effects Analysis on Hydrocarbon Removal Performance of an Adsorptive Catalytic Gasoline Particulate Filter in the Gasoline Engine During Cold Start

Effects analysis on hydrocarbon light-off performance of a catalytic gasoline particulate filter during cold start

Hydrocarbon Emission Control of an Adsorptive Catalytic Gasoline Particulate Filter During Cold-Start Period of the Gasoline Engine

Study on temperature characteristics of gasoline engine particulate filters during fuel cut-off

Study of Soot Dynamic Behavior and Catalytic Regeneration in Diesel Particulate Filters

Analysis of Temperature and Pressure Characteristics in Catalyzed Diesel Particulate Filter Operation for Heavy-Duty Diesel Engine

Evaluating the Filtration Efficiency of Close-Coupled Catalyzed Gasoline Particulate Filter (cgpf) over the WLTC and Simulated RDE Cycles.

Performance Enhancement of the Gasoline Engine Hydrocarbon Catchers for Reducing Hydrocarbon Emission During the Cold-Start Period

Experimental Analysis on the Combustion Performance of Aftertreatment Diesel Burner under Cold Start and Warm-Up Conditions

Effects Analysis on Soot Combustion Performance Enhancement in a Rotary Diesel Particulate Filter Unit During Continuous Microwave Heating

Particulate Emission Characteristics and GPF Performance of WLTC Cycle Based on Exhaust Gas Simulator

Effects of Exhaust Parameters on Temperature and Pressure Drop of the Gasoline Particulate Filter in the Regeneration Equilibrium State

An experimental investigation of particulate emission characteristics of catalytic diesel particulate filters during passive regeneration

Study on Burner Type Diesel Particulate Filter System Using Compressed Air from Turbocharger