Abstract:Pressure drop is an important parameter in the regeneration process of diesel particulate filter (DPF) and catalyzed DPF (CDPF). It indicates the overall oxidation status of the particle layer on the filter channel, while the thickness change of the particle layer reflects the structure change of the particle layer on the wall surface. This research systematically investigates the effect of catalyst back diffusion on particle layer oxidation characteristics during the CDPF activity regeneration process based on pressure drop and thickness change. The experimental results show that the pressure drop of different thickness particle layers on the CDPF filter during regeneration exhibits a three-stage trend with the back diffusion effect of catalysts. When the particle layer deposition thickness is less than 80 μ m, the pressure drop rate is the highest in the second stage and the beneficial effect of back diffusion in promoting the oxidation of carbon black particles leads to a significantly higher pressure drop rate in the second stage of CDPF than DPF. When the particle layer thickness exceeds 80 μ m, the diameter of the effective airflow micropores (effective flow pores) inside the particle layer gradually decreases, resulting in a lower pressure drop rate in the second stage of CDPF compared to DPF. However, the duration of CDPF in the second stage is longer, leading to a shorter duration of CDPF in the third stage and a smaller total pressure drop value. The study also elucidates a time delay in the initiation of pressure drop and thickness reduction in CDPF, which is significantly smaller than the DPF's if deposition thickness exceeds 193 μ m. This phenomenon is attributed to the catalyst-induced simultaneous oxidation at both the top and bottom of the particle layer. These findings have increased the subtle understanding of the catalytic role in regulating the pressure drop and thickness of the particulate filter during regeneration. This study provides a theoretical basis for elucidating the impact of reverse diffusion of catalysts on the oxidation characteristics of particle layers and lays a research foundation for a deeper understanding of the active regeneration process of CDPF.

Analysis of Temperature and Pressure Characteristics in Catalyzed Diesel Particulate Filter Operation for Heavy-Duty Diesel Engine

Investigation of the Physicochemical Properties of Soot Subjected to Non-Catalytic and CeO2-catalytic Aging under Sequential Aerobic and Anaerobic Exhaust-Like Conditions Simulating the Transition from Engine Operation to Cessation

An Assessment of the Application of Catalyst Preheating Prior to Engine Cold Start to Improve the Filtration Performance of CDPF on Particulate Emissions

An experimental investigation of particulate emission characteristics of catalytic diesel particulate filters during passive regeneration

Particle filter performance of soot-loaded diesel particulate filter and the effect of its regeneration on the particle number and size distribution

A Numerical Investigation of the Combined Effects of Initial Temperature and Catalyst Activity on the Dynamics of Soot Combustion in a Catalytic Diesel Particulate Filter

The back diffusion of catalysts on the oxidation characteristics of particle layer during the CDPF active regeneration process

Multi-objective Optimization of Composite Regeneration Performance of a CeO2-based Catalyzed Diesel Particulate Filter

Investigation of Diesel Particulate Filter Performance under Typical Failure Conditions

Experimental study on filtration and continuous regeneration of a particulate filter system for heavy-duty diesel engines.

Ash effects on diesel soot–catalytic oxidation and its chemical reaction kinetics: the comparison of powder sample and CDPF waffle sample

Methodology of diesel particulate filter testing on test bed for non-road engine application

Numerical Simulation of Diesel Particulate Filter Regeneration Considering Ash Deposit

Study on Characteristics and Control Strategy of Diesel Particulate Filters Based on Engine Bench

Experimental Study and Numerical Analysis on Pressure Drop and Temperature Field Characteristics of Asymmetric Cell Technology Diesel Particulate Filter for Silicon Carbide

Full course evolution characteristics of DPF active regeneration under different inlet HC concentrations

Effects of ash composition and ash stack heights on soot deposition and oxidation processes in catalytic diesel particulate filter

Experimental Investigation on the DPF High-Temperature Filtration Performance under Different Particle Loadings and Particle Deposition Distributions

Comparison of the Use of Real Diesel Soot and Soot Surrogate in the Performance Analysis of Diesel Particulate Filters

Filtration Efficiency and Regeneration Behavior in a Catalytic Diesel Particulate Filter with the Use of Diesel/Polyoxymethylene Dimethyl Ether Mixture

Experimental investigation of diesel soot oxidation reactivity along the exhaust after-treatment system components