Abstract:Pressure drop is an important parameter in the regeneration process of diesel particulate filter (DPF) and catalyzed DPF (CDPF). It indicates the overall oxidation status of the particle layer on the filter channel, while the thickness change of the particle layer reflects the structure change of the particle layer on the wall surface. This research systematically investigates the effect of catalyst back diffusion on particle layer oxidation characteristics during the CDPF activity regeneration process based on pressure drop and thickness change. The experimental results show that the pressure drop of different thickness particle layers on the CDPF filter during regeneration exhibits a three-stage trend with the back diffusion effect of catalysts. When the particle layer deposition thickness is less than 80 μ m, the pressure drop rate is the highest in the second stage and the beneficial effect of back diffusion in promoting the oxidation of carbon black particles leads to a significantly higher pressure drop rate in the second stage of CDPF than DPF. When the particle layer thickness exceeds 80 μ m, the diameter of the effective airflow micropores (effective flow pores) inside the particle layer gradually decreases, resulting in a lower pressure drop rate in the second stage of CDPF compared to DPF. However, the duration of CDPF in the second stage is longer, leading to a shorter duration of CDPF in the third stage and a smaller total pressure drop value. The study also elucidates a time delay in the initiation of pressure drop and thickness reduction in CDPF, which is significantly smaller than the DPF's if deposition thickness exceeds 193 μ m. This phenomenon is attributed to the catalyst-induced simultaneous oxidation at both the top and bottom of the particle layer. These findings have increased the subtle understanding of the catalytic role in regulating the pressure drop and thickness of the particulate filter during regeneration. This study provides a theoretical basis for elucidating the impact of reverse diffusion of catalysts on the oxidation characteristics of particle layers and lays a research foundation for a deeper understanding of the active regeneration process of CDPF.

An experimental investigation of particulate emission characteristics of catalytic diesel particulate filters during passive regeneration

Study of Soot Dynamic Behavior and Catalytic Regeneration in Diesel Particulate Filters

An Assessment of the Application of Catalyst Preheating Prior to Engine Cold Start to Improve the Filtration Performance of CDPF on Particulate Emissions

Analysis of Temperature and Pressure Characteristics in Catalyzed Diesel Particulate Filter Operation for Heavy-Duty Diesel Engine

Particle filter performance of soot-loaded diesel particulate filter and the effect of its regeneration on the particle number and size distribution

Experimental study on filtration and continuous regeneration of a particulate filter system for heavy-duty diesel engines.

Experimental study on gas and particle emission characteristics of carbon black oxidation process in the presence of water and catalysts

Full course evolution characteristics of DPF active regeneration under different inlet HC concentrations

Experimental Study on a Diesel Particulate Filter with Reciprocating Flow.

Modeling of Soot Fragmentation That Proceeds in a Catalyzed Diesel Particulate Filter of a Diesel Engine

Influence of the Engine Drop-to-idle Process on Regeneration Temperature, Filtration and Morphology Characteristics of Diesel Particulate Filters

Study of the Particulate Purification Efficiency of Diesel Oxidation Catalyst and Catalyzed Diesel Particulate Filter

Investigation on gas and particle emission characterization of carbon black oxidation process promoted by catalyst/ash

Effect of ash on temperature and particulate emission characteristics of diesel particulate filter during active regeneration

Effect of regeneration method and ash deposition on diesel particulate filter performance: a review

Comparison of the Use of Real Diesel Soot and Soot Surrogate in the Performance Analysis of Diesel Particulate Filters

The back diffusion of catalysts on the oxidation characteristics of particle layer during the CDPF active regeneration process

Impacts of Continuously Regenerating Trap and Particle Oxidation Catalyst on the NO2 and Particulate Matter Emissions Emitted from Diesel Engine.

Filtration Efficiency and Regeneration Behavior in a Catalytic Diesel Particulate Filter with the Use of Diesel/Polyoxymethylene Dimethyl Ether Mixture

Experimental investigation of diesel soot oxidation reactivity along the exhaust after-treatment system components

Effect of catalyzed diesel particulate filter on gaseous emissions from automobli e diesel engine