Abstract:Cold-start characteristics of speed-up is one of the most essential issues affecting the environmental adaptation of diesel engines at extremely frigid environments in plateau. In this study, speed, ignition, combustion, and emission characteristics of speed-up of a high-pressure common rail hybrid diesel engine during cold-start are comparatively investigated at different ambient temperatures in plateau (2000 m, 20~-45 °C). The results indicate that fuel injection duration is extended due to increased fuel's viscosity, atomization and evaporation quality are decreased, and heat absorbed by cold wall of the combustion chamber is increased as ambient temperature drops from normal to extremely frigid. In cold climates, deterioration of thermal state and spray mixture's quality in the cylinder and increase of chemical reaction time's proportion lead to delayed ignition timing of first-firing-cycle and transient combustion cycles, and instable peak pressure in-cylinder, indicated mean effective pressure and start of combustion during speed-up. This also results in engine speed stagnation and poor stability at lower ambient temperatures. As a result, cold-start power performance decreases and exhaust emissions increase sharply. The results offer good contributions that the lowest temperature for cold-start success is −45 °C and cold-start's fuel injection strategy is proposed under extreme conditions. Among these findings, transient emissions of HC, CO, CO 2 and NO x all increase first, and reach a peak at the end of speed-up duration, then decrease and level off when cyclic fuel injection quantity of start-up is constant. Transient and peak emissions of HC increase progressively with decreased ambient temperature. Transient and peak emissions of CO, CO 2 , and NO x reach their peak at −35 °C but decrease significantly at −45 °C due to weak blue-flame and hot-flame reactions.The intervention of glow plug enables cold-start ignition at lower ambient temperatures but does not effectively improve combustion and speed stability and emission performance.

Effects analysis on hydrocarbon light-off performance of a catalytic gasoline particulate filter during cold start

An Assessment of the Application of Catalyst Preheating Prior to Engine Cold Start to Improve the Filtration Performance of CDPF on Particulate Emissions

Effects analysis on soot combustion performance enhancement of an improved catalytic gasoline particulate filter regeneration system with electric heating

Investigations on a new C-GPFs with electric heating for enhancing the integrated regeneration performance under critical parameters

A review of studies using hydrocarbon adsorption material for reducing hydrocarbon emissions from cold start of gasoline engine

Study on temperature characteristics of gasoline engine particulate filters during fuel cut-off

Hydrocarbon adsorption mechanism of modern automobile engines and methods of reducing hydrocarbon emissions during cold start process: A review

Investigation on the hydrocarbon adsorption performance enhancement of the ZSM-5 zeolite with different Si/Al ratio in the cold start process of the gasoline engine

Experimental Study of Zeolite Effect on Trap of Hydrocarbon from Gasoline Engine During Cold-start

Study on formation process of in-cylinder unburned hydrocarbons during cold start and idling periods in spark ignition engines

Effect of Methanol Addition into Gasoline on the Combustion Characteristics at Relatively Low Temperatures

Investigation into Hydrocarbon Emissions from Crevice and Oil Film During Cold Start and Idling Periods in A Spark Ignition Engine

Multi-objective Optimization of Composite Regeneration Performance of a CeO2-based Catalyzed Diesel Particulate Filter

Primary organic gas emissions in vehicle cold start events: Rates, compositions and temperature effects

Effects of ambient temperature and cold starts on excess NOx emissions in a gasoline direct injection vehicle

Effects of Ambient Temperatures on Regulated and Unregulated Emissions from Methanol/Gasoline Engine During Cold Start

Visualization Research on Low-Temperature Ignition and Combustion Characteristics of Diesel/Gasoline Blends Under Cold-Start Conditions

Impacts of different ambient temperatures on cold-start characteristics of speed-up duration of an ISAD hybrid diesel engine in plateau

Experimental study on particle size distribution of gasoline compression ignition (GCI) at low-load condition

Experimental investigation of atomization characteristics at low temperature environments during diesel engine cold start

The Effects of Unburned Hydrocarbon Recirculation on Ignition and Combustion During Diesel Engine Cold Starts