Abstract:High nitrogen oxide levels of the conventional diesel engine combustion often requires the introduction of exhaust gas recirculation at high engine loads. This can adversely affect the smoke emissions and fuel conversion efficiency associated with a reduction of the in-cylinder air-fuel ratio (lambda). In addition, low exhaust gas temperatures at low engine loads reduce the effectiveness of aftertreatment systems necessary to meet stringent emissions regulations. These are some of the main issues encountered by current heady-duty diesel engines. In this work, variable valve actuation–based advanced combustion control strategies have been researched as means of improving upon the engine exhaust temperature, emissions, and efficiency. Experimental analysis was carried out on a single-cylinder heady-duty diesel engine equipped with a high-pressure common-rail fuel injection system, a high-pressure loop cooled exhaust gas recirculation, and a variable valve actuation system. The variable valve actuation system enables a late intake valve closing and a second intake valve opening during the exhaust stroke. The results showed that Miller cycle was an effective technology for exhaust temperature management of low engine load operations, increasing the exhaust gas temperature by 40 °C and 75 °C when running engine at 2.2 and 6 bar net indicated mean effective pressure, respectively. However, Miller cycle adversely effected carbon monoxide and unburned hydrocarbon emissions at a light load of 2.2 bar indicated mean effective pressure. This could be overcome when combining Miller cycle with a second intake valve opening strategy due to the formation of a relatively hotter in-cylinder charge induced by the presence of internal exhaust gas recirculation. This strategy also led to a significant reduction in soot emissions by 82% when compared with the baseline engine operation. Alternatively, the use of external exhaust gas recirculation and post injection on a Miller cycle operation decreased high nitrogen oxide emissions by 67% at a part load of 6 bar indicated mean effective pressure. This contributed to a reduction of 2.2% in the total fluid consumption, which takes into account the urea consumption in aftertreatment system. At a high engine load of 17 bar indicated mean effective pressure, a highly boosted Miller cycle strategy with exhaust gas recirculation increased the fuel conversion efficiency by 1.5% while reducing the total fluid consumption by 5.4%. The overall results demonstrated that advanced variable valve actuation–based combustion control strategies can control the exhaust gas temperature and engine-out emissions at low engine loads as well as improve upon the fuel conversion efficiency and total fluid consumption at high engine loads, potentially reducing the engine operational costs.

A Novel Valve Strategy for Particulate Matter Reduction in a Gasoline Direct Injection Engine Operated at Cold Conditions

Numerical Investigations of Injection Timing Effects on a GDI Engine Performance: Part B, In-Cylinder Emission Formation and Oxidation Process

Numerical Investigation of the Effect of Injection Timing on the In-Cylinder Activity of a Gasoline Direct Injection Engine

Optimising the Particulate Emission Characteristics of a Dual-Fuel Spark Ignition Engine by Changing the Gasoline Direct Injection Strategy

Numerical Investigation of the Influence of Intake Valve Lift Profile on A Diesel Premixed Charge Compression Ignition Engine with A Variable Valve Actuation System at Moderate Loads and Speeds

Investigation of Injection Strategy on Combustion and Emission Characteristics in a GDI Engine with a 50 MPa Injection System

Variable valve actuation–based combustion control strategies for efficiency improvement and emissions control in a heavy-duty diesel engine

The Study of the Control on the First Firing Cycle for Reducing the Cold Start Emissions in a Liquid Petrol Gas Spark Ignition Engine

Full Engine Cycle CFD Investigation of Effects of Variable Intake Valve Closing on Diesel PCCI Combustion and Emissions

Improving the Partial-Load Performance and Emission of GDI Engine by Combining Injection Strategy and Exhaust Variable Valve Timing Technology

Intake Air Heating Strategy to Reduce Cold-Start Emissions from Diesel Engines

Variable Valve Strategy Evaluation for Low-Load Operation in a Heavy-Duty Gasoline Compression Ignition Engine

Effect of Operation Strategy on First Cycle CO, HC, and PM/PN Emissions in a GDI Engine

Combustion and Emissions of A Direct-Injection Diesel Engine During Cold Start under Different Exhaust Valve Closing Timing Conditions

Influence of Valve Overlap Angle on GDI Engine Performance and Particulate Emission

Reducing Cold Start Emissions from Automotive Diesel Engine at Cold Ambient Temperatures

Recent Progress in Particle Matter Emissions and Control Strategies of Gasoline Direct Injection Engines

Numerical Evaluation of the Potential of Late Intake Valve Closing Strategy for Diesel Pcci (premixed Charge Compression Ignition) Engine in A Wide Speed and Load Range

A Methodology for Regulating Fuel Stratification and Improving Fuel Economy of GCI Mode Via Double Main-Injection Strategy

Particle Number Emissions Reduction Using Multiple Injection Strategies in A Boosted Spark-Ignition Direct-Injection (sidi) Gasoline Engine

Numerical Study on Effect of Injection Parameters on Combustible Mixture Formation of Gasoline Engine During Cold Start