Abstract:Atomization of low-temperature fuel is encountered in extreme operating conditions of liquid propulsion systems such as cold start and high-altitude relight for aeroengines. Fuel temperature has a great impact on airblast spray characteristics by influencing fuel viscosity and thus the gas–liquid interaction, which raises the demand to clarify the temperature-dependent transition in near-nozzle breakup behavior and the corresponding droplet size distribution. A liquid-centered swirl coaxial injector is tested on the low-temperature swirl spray and combustion test rig at Zhejiang University, using 25 kHz high-speed digital off-axis holography. RP-3 aviation kerosene is atomized under ignition conditions at temperatures of 233, 253, and 301 K, fuel pressures of 0.03 and 0.69 MPa, and air pressure ranging from 0 to 4.0 kPa. Time-resolved near-nozzle dynamics suggest four types of elementary breakup processes: wavy-sheet breakup, pulsating breakup, membrane-type breakup, and nonaxisymmetric Rayleigh breakup. Each process alternately dominates the near field as fuel Reynolds number (Ref) and aerodynamic Weber number (Weg) decrease, corresponding to four primary breakup modes. A mode classification plot is summarized. Spray structures show an extended breakup length and reduced spray cone angle as fuel temperature (Tf) decreases. Increasing air pressure (Pg) promotes spray expansion at 0.03 MPa, but contracts spray cone at 0.69 MPa. Cross-sectional Sauter mean diameter (SMD) distribution indicates a solid-cone spray at 0.03 MPa and a hollow cone spray at 0.69 MPa. Lowering Tf will rise the SMD in the spray center at 0.03 MPa and transform the toroidal SMD distribution at 0.69 MPa into a solid one. Finally, a temperature-related SMD model is derived considering the exponential viscosity–temperature relationship, and a good fit with R2 > 0.95 is achieved. This research aims to deepen the understanding of the effects of low temperature on the transition of near-nozzle atomization characteristics for airblast sprays. Both spray visualization and SMD results provide reference for numerical simulations and near-nozzle spray modeling.

Experimental investigation of atomization characteristics at low temperature environments during diesel engine cold start

Numerical Investigation of Diesel Spray Combustion Characteristics in the Ammonia/air Atmosphere

Experimental study on diesel fuel injection characteristics under cold start conditions with single and split injection strategies

Effects of Low Temperature on Near-Nozzle Breakup and Droplet Size Distribution in Airblast Kerosene Spray

An Assessment of the Application of Catalyst Preheating Prior to Engine Cold Start to Improve the Filtration Performance of CDPF on Particulate Emissions

Experimental Study on Primary Breakup of Diesel Spray under Cold Start Conditions

Study on injection characteristics of diesel and DME

INVESTIGATION OF ATOMIZATION PERFORMANCE ON A CENTRIFUGAL FUEL SLINGER WITH A PHASE DOPPLER ANEMOMETER

Investigation on cold start issues of methanol engines and its improvement from the perspective of droplet evaporation

Near-nozzle Microscopic Characterization of Diesel Spray under Cold Start Conditions with Split Injection Strategy

Impacts of different ambient temperatures on cold-start characteristics of speed-up duration of an ISAD hybrid diesel engine in plateau

Study on the First-Firing-Cycle combustion characteristics of high-altitude and low-temperature environments during diesel engine cold start

Ethanol drop impingement on ultracold surfaces under low-temperature cold-start conditions of engines

Wall Temperature Effects on Ignition Characteristics of Liquid-phase Spray Impingement for Heavy-duty Diesel Engine at Low Temperatures

Reducing Cold Start Emissions from Automotive Diesel Engine at Cold Ambient Temperatures

Experimental Investigation of Low-Temperature Autoignition in Turbulent Premixed Swirling Flames

Cold and Warm Start Characteristics using HVO and RME Blends in a V6 Diesel Engine

Fuel injection performance and spray characteristic of high‐pressure common rail systems at low temperatures

Key Factors Affecting the Cold Start of Diesel Engines

An Experimental Study on the Measures for Improving Cold Start/Warm-up Process of Engine

Effect of Low Fuel Temperature on Combustion Deterioration of Kerosene Swirling Spray Flames Using OH-PLIF