Abstract:One-step metal-assisted chemical etching (MACE) was used to fabricate porous silicon nanowire arrays. Also, the effects of doping level, AgNO3 concentration, and HF concentration on the morphology and structure of porous silicon nanowire were investigated. The results show that the higher doping level is beneficial for etching the silicon wafer and forming silicon nanowire arrays. This is because the higher doping level introduces more impurities and defects on the surface of the silicon wafer, and at the same time, the Schottky barrier between the silicon wafer with the higher doping level and the solution is lower. Thus, the silicon wafer is easier to oxidate to form nanowire arrays. The AgNO3 concentration plays a critical role in the fabrication of the porous silicon nanowire arrays during the one-step MACE process. If AgNO3 concentration is too low or too high, corrosion pits and collapsed clusters of nanowires could form on the surface of the silicon wafer. When AgNO3 concentration was 0.02 mol·L-1, silicon nanowires grew and became longer, eventually forming a porous array of silicon nanowire. In the meantime, as silicon nanowires grew, capillary stress between nanowires caused agglomeration at the top of some nanowires. Furthermore, when HF solution concentration exceeded 4.6 mol·L-1, the length of silicon nanowire increased with increasing HF concentration. Furthermore, a porous structure was formed on top the silicon nanowire, and the porosity of the silicon nanowires increased with increasing HF concentration. This was due to a large number of Ag+ random nucleations at the top of the nanowires, and lateral etching of the silicon nanowires occurred. In the end, the formation process of the porous silicon nanowires is explained by a model based on the experimental phenomena. It is attributed to the deposition of silver ions and the oxidation of dissolved silicon substrates.

Silicon Vias Fabricatied by Metal-Assisted Chemical Etching

Study on the behaviors of Cu filling in special through-silicon-vias by the simulation of electric field distribution

Low-cost Micrometer-Scale Silicon Vias (svs) Fabrication by Metal-Assisted Chemical Etching (mace) and Carbon Nanotubes (cnts) Filling

A wet process to etch arrayed vias for through silicon via application of 3D packaging

Uniform Vertical Trench Etching on Silicon with High Aspect Ratio by Metal-Assisted Chemical Etching Using Nanoporous Catalysts.

Low Cost and High‐Aspect Ratio Micro/Nano Device Fabrication by Using Innovative Metal‐Assisted Chemical Etching Method

Simple through silicon interconnect via fabrication using dry filling of sub-micron Au particles for 3D MEMS

Study of the Relationship Between Metal-Assisted Chemical Etching and Direction of the Applied Electric Field

Porous Silicon Nanowire Arrays Fabrication Through One-Step Metal-Assisted Chemical Etching

A Wet Etching Approach for the Via-Reveal of a Wafer with Through Silicon Vias

Silicon Micromachining Of High Aspect Ratio, High-Density Through-Wafer Electrical Interconnects For 3-D Multichip Packaging

Improved Metal Assisted Chemical Etching Method for Uniform, Vertical and Deep Silicon Structure

Microfabrication of Through Silicon Vias (TSV) for 3D SiP

Through-silicon via arrays manufactured by photo assisted electrochemical etching and copper electroplating under SC-CO2 environment

Filling Technique Of Through Silicon Via By Co-Depositing Copper And Sic Nano-Particles

Copper Filling Process for Small Diameter, High Aspect Ratio Through Silicon Via (Tsv)

Fabrication and electrical characterization of sub-micron diameter through-silicon via for heterogeneous three-dimensional integrated circuits

Gold-thickness-dependent Schottky Barrier Height for Charge Transfer in Metal-Assisted Chemical Etching of Silicon

Metal-Assisted Chemical Etching Using Tollen’s Reagent to Deposit Silver Nanoparticle Catalysts for Fabrication of Quasi-ordered Silicon Micro/Nanostructures

Study of a through-silicon/substrate via filling method based on the combinative effect of capillary action and liquid bridge rupture

Metal Ions' Dynamic Effect on Metal-Assisted Catalyzed Etching of Silicon in Acid Solution