Abstract:Alloying is known as an effective strategy to improve the mechanical properties of metallic materials. Here we show that the microstructure and mechanical behavior of a TiZrNbHf1.6 high entropy alloy film can be highly tuned by Ni addition. The newly designed TiZrNbHf1.6Nix (x = 0, 0.4, 1.2, 1.8, 2.5, 3.0, 4.6) alloy films are synthesized by co-sputtering Ti, Zr, Nb, Hf and Ni elemental targets. The microstructure and mechanical behavior of the alloy films are investigated by X-ray diffraction (XRD), transmission electron microscopy (TEM), and nano/micro-indentations. The microstructural analysis indicates that the TiZrNbHf1.6 film has a single body-centered cubic with columnar-nanograined structure. As Ni content increases to 0.4 or above, the films show a complete amorphous structure. Our theoretical analysis shows that the transition from the crystalline to the amorphous structure can be attributed to the large atomic radius difference and the change of the thermodynamic parameters (e.g., mixing entropy and mixing enthalpy) due to the Ni addition. Compared to the TiZrNbHf1.6 film with a hardness of 4.8 GPa, a hardness increase of 8–35% is achieved in the Ni-doped alloy films (5.2–6.5 GPa) as measured by nanoindentation. The elevated hardness may be attributed to the severe lattice distortion and the amorphous structure induced by the Ni addition. Furthermore, microindentation reveals a diversity of deformation behavior in those films with different Ni content. A homogeneous deformation (slight plastic pileup) occurred in the films with Ni content of 1.2 and 4.6, which is close to the deformation behavior of the crystal TiZrNbHf1.6 film. While the film with a Ni content of 1.8 exhibits a catastrophic cracking deformation. Finally, multiple shear banding dominates the deformation of these films with Ni content of 0.4, 2.5 and 3.0. Our findings demonstrate that ultrastrong and highly deformable amorphous high entropy alloy thin films can be developed by appropriate element addition, making them promising materials for corrosion and wear-resistant coatings.

Nanostructured nitride films of multi-element high-entropy alloys by reactive DC sputtering

Structure, Composition and Mechanical Properties of Reactively Sputtered (tivcrtaw)nx High-Entropy Films

Effects of Nitrogen Content on the Structure and Mechanical Properties of (Al0.5CrFeNiTi0.25)Nx High-Entropy Films by Reactive Sputtering

Structural and Mechanical Properties of Multi-Element (alcrmotatizr)nx Coatings by Reactive Magnetron Sputtering

Microstructure and mechanical properties of (AlCrTiZrV)Nx high-entropy alloy nitride films by reactive magnetron sputtering

Structure and Properties of Two Al–Cr–Nb–Si–Ti High-Entropy Nitride Coatings

Effects of nitrogen content on microstructures and mechanical properties of (AlCrTiZrHf)N high-entropy alloy nitride films

Nitride Films Deposited from an Equimolar Al–Cr–Mo–Si–Ti Alloy Target by Reactive Direct Current Magnetron Sputtering

Fabrication of nitride films by co-sputtering of high-entropy alloys and tungsten

Microstructure, mechanical and corrosion performance of magnetron sputtered (Al0.5CoCrFeNi)Nx high-entropy alloy nitride films

Mechanical properties of nanostructured CoCrFeNiMn high-entropy alloy (HEA) coating

Nickel content-dependent microstructure and mechanical properties of TiZrNbHfNi high entropy alloy thin films

Compositional Gradient Films Constructed by Sputtering in a Multicomponent Ti–Al–(Cr, Fe, Ni) System

Effects of Nitrogen Flow Ratio on the Structure and Properties of Reactively Sputtered (almonbsitativzr)n(x) Coatings

Recent Progress in Multi-Element Alloy and Nitride Coatings Sputtered from High-Entropy Alloy Targets

Effect of nitrogen pressure on the fabrication of AlCrFeCoNiCu0.5 high entropy nitride thin films via cathodic arc deposition

Strong Amorphization of High-Entropy AlBCrSiTi Nitride Film

Microstructure Characterization of AlxCo1Cr1Cu1Fe1Ni1 (x=0 and 2.5) High-Entropy Alloy Films

Effects of nitrogen content on structure and mechanical properties of multi-element (AlCrNbSiTiV)N coating

Microstructure evolution and mechanical properties of refractory high-entropy alloy nitride film

Nano dual-phase CuNiTiNbCr high entropy alloy films produced by high-power pulsed magnetron sputtering