Abstract:The utilization and effectiveness of a custom-made, portable and low-cost structural health monitoring (SHM) system that implements the PZT-based electro-mechanical admittance (EMA) methodology for the detection and evaluation of the damage of flexural reinforced concrete (RC) beams is presented. Tests of large-scale beams under monotonic and cyclic reversal-imposed deformations have been carried out using an integrated wireless impedance/admittance monitoring system (WiAMS) that employs the voltage measurements of PZT transducers. Small-sized PZT patches that have been epoxy-bonded on the steel bars surface and on the external concrete face of the beams are utilized to diagnose damages caused by steel yielding and concrete cracking. Excitations and simultaneous measurements of the voltage signal responses of the PZT transducers have been carried out at different levels of the applied load during the tests using the developed SHM devices, which are remotely controlled by a terminal emulator. Each PZT output voltage versus frequency response is transferred wireless and in real-time. Statistical index values are calculated based on the signals of the PZT transducers to represent the differences between their baseline response at the healthy state of the beam and their response at each loading/damage level. Finite Element Modeling (FEM) simulation of the tested beams has also been performed to acquire numerical results concerning the internal cracks, the steel strains and the energy dissipation and instability parameters. FEM analyses are used to verify the experimental results and to support the visual observations for a more precise damage evaluation. Findings of this study indicate that the proposed SHM system with the implementation of two different PZT transducer settings can be effectively utilized for the assessment of structural damage caused by concrete cracking and steel yielding in flexural beams under monotonic and cyclic loading.

Damage detection of a prestressed concrete beam

Dynamic evaluation for simply supported reinforced concrete beam with considering the influence of overload

Vibration-Based Damage Detection Of Cable-Stayed Bridges

Performance Monitoring of Damaged Bridge Members Strengthened with Carbon Fiber Reinforced Polymer

Damage identification of reinforced concrete beams

Cracking Behavior of Cfrp Laminate-Strengthened Rc Beams with Premechanical and Postmechanical Environmental Damage

Damage Identification Analysis of Bridge Beam with Spaced Supports As Quasi-Periodic Structure

Assessing Damage to Beam–Column Connections in Reinforced Concrete Structures from Vibrational Measurement Results

Dynamic Fracture Catastrophe Model of Concrete Beam under Static Load

Structural behavior of damaged reinforced concrete beams under static cyclic loading

Experimental Study of Bridge Expansion Joint Damage Based on Natural Frequency

Stiffness Degradation Characteristics Destructive Testing and Finite-Element Analysis of Prestressed Concrete T-Beam

Detect the Stiffness Transition in Beam Structures by Using the Passive Tap-Scan Method

DETECTION OF DAMAGE IN CONCRETE STRUCTURE VIA SHIFTS IN NATURAL FREQUENCY

Flexural Damage Diagnosis in Reinforced Concrete Beams Using a Wireless Admittance Monitoring System-Tests and Finite Element Analysis

Destructive Test Study of a Prestressed Concrete Hollow Slab Beam Bridge

Dynamic testing of a damaged bridge

Changes of modal properties of simply-supported plane beams due to damages

Health monitoring of steel box girder bridges using non-contact sensors

Fiber-based damage analysis of reinforced concrete bridge piers

Energy-Based Damage Assessment Methodology for Structural Health Monitoring of Modern Reinforced Concrete Bridge Columns