Abstract:The utilization and effectiveness of a custom-made, portable and low-cost structural health monitoring (SHM) system that implements the PZT-based electro-mechanical admittance (EMA) methodology for the detection and evaluation of the damage of flexural reinforced concrete (RC) beams is presented. Tests of large-scale beams under monotonic and cyclic reversal-imposed deformations have been carried out using an integrated wireless impedance/admittance monitoring system (WiAMS) that employs the voltage measurements of PZT transducers. Small-sized PZT patches that have been epoxy-bonded on the steel bars surface and on the external concrete face of the beams are utilized to diagnose damages caused by steel yielding and concrete cracking. Excitations and simultaneous measurements of the voltage signal responses of the PZT transducers have been carried out at different levels of the applied load during the tests using the developed SHM devices, which are remotely controlled by a terminal emulator. Each PZT output voltage versus frequency response is transferred wireless and in real-time. Statistical index values are calculated based on the signals of the PZT transducers to represent the differences between their baseline response at the healthy state of the beam and their response at each loading/damage level. Finite Element Modeling (FEM) simulation of the tested beams has also been performed to acquire numerical results concerning the internal cracks, the steel strains and the energy dissipation and instability parameters. FEM analyses are used to verify the experimental results and to support the visual observations for a more precise damage evaluation. Findings of this study indicate that the proposed SHM system with the implementation of two different PZT transducer settings can be effectively utilized for the assessment of structural damage caused by concrete cracking and steel yielding in flexural beams under monotonic and cyclic loading.

Damage identification of reinforced concrete beams

IFC‐based Semantic Modeling of Damaged RC Beams Using 3D Point Clouds

Damage identification of main girders for long span cable-stayed bridge based on flexibility matrix

Dynamic damage identification for beam structures based on transfer entropy

Damage Identification of Multi-Box Steel-Concrete Composite Bridges Based on Modal Curvature Difference Method

Cracking Behavior of Cfrp Laminate-Strengthened Rc Beams with Premechanical and Postmechanical Environmental Damage

Fiber-based damage analysis of reinforced concrete bridge piers

Damage Detection in Steel Beams Using Generalized Flexibility Quotient Difference Based Damage Index and Artificial Neural Network

Vibration-Based Damage Detection Of Cable-Stayed Bridges

Damage Identification of Continuous Rigid Frame Concrete Bridge

Damage Evaluation in Shear-Critical Reinforced Concrete Beam using Piezoelectric Transducers as Smart Aggregates

Damage Detection of Concrete Structure Based on Approximate Entropy

Damage Assessment Using The Energy Dissipation Ratio Of Acceleration Signals

Experimental study on the damage identification of bridge expansion joints

Flexural Damage Diagnosis in Reinforced Concrete Beams Using a Wireless Admittance Monitoring System-Tests and Finite Element Analysis

Damage Detection in Reinforced Concrete Berthing Jetty Using a Plasticity Model Approach

Damage location, quantification and characterization of steel-concrete composite beams using acoustic emission

Energy-Based Damage Assessment Methodology for Structural Health Monitoring of Modern Reinforced Concrete Bridge Columns

Intensity Analysis Method of Acoustic Emission Signals for the Damage Monitoring of Post-Tensioned Concrete Beams

Structural behavior of damaged reinforced concrete beams under static cyclic loading

A novel damage index for reinforced concrete beam-column joint using acoustic emission technique