Abstract:The cracking behavior greatly influences the material removal and surface integrity during the abrasive machining of brittle materials. The abrasive machining can be simplified as a series of scratching by different-shaped indenters. In this paper, a scratch-induced stress field model is built to analyze the cracking behavior during scratching brittle materials. The model considers conical, pyramidal, and spherical (CPS) indenters and correlates the scratch-induced principal stress with workpiece material properties, indenter geometries, and scratch behavior parameters (e.g., scratch normal load, tangential load, friction coefficient, scratch depth). With the model, the effects of scratch depth and indenter geometries on the scratch behavior and cracking behavior are investigated. The results show that the scratch load decreases when a sharper indenter or a spherical indenter with a smaller radius is used. The larger the scratch depth, the easier it is for radial, median, and lateral (RML) cracks to initiate. There is an optimal indenter half-apex angle at which it is most difficult to initiate radial and median cracks. The lateral crack easily initiates when the indenter becomes sharp. The initiation position of radial crack changes from being in front of the indenter to being behind it as the scratch depth increases or the half-apex angle decreases. The propagation angle of radial crack decreases, while that of median crack increases with an increase in scratch depth. The sizes of RML cracks increase with an increasing scratch depth or half-apex angle. Finally, the model is validated through scratching experiments on fused silica using CPS indenters and by referencing previous research. It demonstrates that the model can accurately determine the sizes of RML cracks, with an average relative error of less than 11%. This research provides guidance on selecting suitable process parameters or indenter geometries to increase the material removal rate and mitigate the crack damage during the abrasive machining of brittle materials.

Propagation Regularity of Sub-Surface Crack in Static Indentation of Fused Silica by Single Abrasive

Study on the Model of Surface Crack Depth in Ceramics Grinding

Prediction and Verification Analysis of Grinding Force in the Single Grain Grinding Process of Fused Silica Glass

Study of Prefabricated Crack Propagation on Monocrystalline Silicon Surfaces for Grinding Damage Analysis

An Investigation into the Densification-Affected Deformation and Fracture in Fused Silica under Contact Sliding

Experimental investigation on grinding-induced surface damage of Fiber Reinforced Ceramic Matrix Composites

Study on Mechanism for Material Removal and Surface Generation by Molecular Dynamics Simulation in Abrasive Processes

An analytical method for assessing the initiation and interaction of cracks in fused silica subjected to contact sliding

Sink-in/pile-up formation and crack nucleation mechanisms of high purity fused silica and soda-lime silica glass during nanoindentation experiments

Characterization of artificial indentation defects in fused silica surface and its damage performance under 355 nm nanosecond laser

Crack Formation Process during Indentation or Scratching on the Surface of MgO Single Crystals

Surface and subsurface cracks characteristics of single crystal SiC wafer in surface machining

Effects of Grinding Parameters on the Processing Temperature, Crack Propagation and Residual Stress in Silicon Nitride Ceramics

Study of the inhibition mechanism of sapphire subsurface damage by tangential ultrasonic vibration

Behavior of 355 nm laser-induced damage growth in fused silica

Mechanism of crack evolution in nano-indentation of single crystal silicon by atomistic simulations and theoretical analysis

Mechanical effect of abrasives on silicon surface in chemo-mechanical grinding

Vibration-assisted material damage mechanism: From indentation cracks to scratch cracks

Theoretical modeling and experimental analysis of single-grain scratching mechanism of fused quartz glass

Effect of grinding damage on cutting force and ductile machining during single grain scratching of monocrystalline silicon

Cracking behavior during scratching brittle materials with different-shaped indenters