Abstract:Multiphase particle-reinforced strategy shows promise for efficiently improving the comprehensive properties of aluminum matrix composites (AMCs) such as thermophysical and mechanical properties. In this work, AMC reinforced with β-eucryptite (LAS), and silicon carbide (SiC) particles were successfully prepared via a powder forging process. The microstructure morphology, interface compatibility, and coefficient of thermal expansion (CTE) of these composites were evaluated. Microstructural characterization illustrated that the co-effect of SiC and LAS resulted in a discontinuous phase with a microporous and deformation-free structure. The microporous structure of these composites was conducive for inward expansion and the elimination of internal stress, effectively limiting the outward thermal expansion behavior of the Al alloys. Moreover, SiC and LAS exhibited tight interfacial bonds with the Al grains, enhancing interfacial bonding strength. These composites provided practical and robust tensile stress that limited the thermal expansion of the Al matrix under heating. A fine Al grain size (53.5 nm) and low micro-strain (0.4 × 10–4) were obtained with increasing LAS content. Consequently, the composites achieved a low CTE of 17.27 × 10–6 K−1 at 500 °C. The experimental CTE values were also compared with theoretical values calculated by a rule of mixture model to confirm that the excellent interfacial bonding between the LAS and SiC reinforcements and the Al matrix imposed an effective constraint on matrix expansion.Graphical abstract

Β-Lialsio4 Reinforced Cu Composite Interlayer for Brazing C/C Composites and Nb

Chemically dealloyed Mg–Cu alloy lamina as an interlayer for reinforcing a C/C composite – TC4 alloy vacuum brazed joint

C/SiC composite-Ti6Al4V joints brazed with negative thermal expansion ZrP2WO12 nanoparticle reinforced AgCu alloy

Brazing of C/C Composite and TiAl Alloy Using TiNiSi Filler Metal Added Cu Interlayer

Brazing of C/C composites and 304 stainless steels via Ni/Mo composite interlayer

Brazing Al2O3 to 4J42 Using Ag–Cu–Ti/Cu/BNi-2 Composite Fillers with Different Thicknesses of Cu Interlayer

Study on the Residual Stress Relieving Mechanism of C/C Composite-Nb Brazed Joint by Employing a Structurally Optimized Graphene Reinforced Cu Foam Interlayer

Design a self-reinforcement buffer layer to assist braze SiC and Nb with Cu-xTiH 2 filler alloy

Joints of Continuous Carbon Fiber Reinforced Lithium Aluminosilicate Glass Ceramics Matrix Composites to Ti60 Alloy Brazed Using Ti-Zr-Ni-Cu Active Alloy

Microstructure and properties of the C/C-superalloy brazed joint by Ni-based filler

Enhancement of load transfer by interfacial bonding in Al-Cu-Mg joints under the in-situ synergistic effect of carbon nanotubes and silicon nitride

Interfacial microstructure and reaction mechanism with various weld fillers on laser welding-brazing of Al/Cu lap joint

Exploring avoiding brittle compounds in brazed joints of C/C composites and DD3 alloys through surface modification

Microstructure and Shear Strength of SiC Joint Brazed with LiAlSiO4 Reinforced AgCuTi Composite Filler

Low residual stress C/C composite-titanium alloy joints brazed by foam interlayer

Microstructure and shear strength of SiC/Zr joint brazed with LiAlSiO4/graphene-coated Cu-foam composite interlayer

Effect of Cu interlayer with different thickness on microstructure and properties of Al2O3/Kovar joints brazed with Cu–Ti/Cu/BNi-2 composite filler

Constructing a heterogeneous interlayer in relieving the residual stresses for the AlN/Cu brazed joint used in IGBT

Microstructure and thermal properties of binary ceramic particle-reinforced aluminum matrix composites with SiC/LAS

Composition design method of Al-Cu alloy for laser powder bed fusion

Microstructural evolution and mechanical property of a SiCf/SiC composite/Ni-based superalloy joint brazed with an Au-Cu-Ti filler