Abstract:This work provides a comprehensive investigation of multi-walled carbon nanotubes (MWCNTs) inducement in weldment and their apparent effect on the microstructure, %elongation and ultimate fracture behavior of Al-Mg-Si alloy referring modified tungsten inert gas (TIG) welding joints. Serious experimental work is carried out at 1 wt%, 1.5 wt%, and 2 wt% of MWCNTs to provide a gradually increasing heterogeneous nucleation. The behavior of grain morphology showed the pure field of epitaxial growth without MWCNTs, and the forestry type morphology for 1 wt% MWCNTs at low welding currents (160 A), though there was a noticeable conversion into equiaxed (EQZ) grains filled with inter-dendritic particles at high welding currents (180 A and 200 A) for 1.5 wt% and 2 wt% of MWCNTs. Moreover, the formation of a cellular type network above the fusion line predominated initially at all parameters. Conversely, fine EQZ grains were formed as they moved upward into the welded zone (WZ) explicitly at a high heat input. A conceptual pictorial model is presented in the study which summarized the behavior of morphological changes at the utilized parameters. The welded joints have demonstrated an increasing trend of strength and %elongation in contrast to joints without added MWCNTs. Comparative results have shown an exceptional increment of 71 to 76% and 67 to 75% of elongation up to ultimate tensile strength (UTS), and a fracture point that was clinched for 1 wt% and 1.5 wt% MWCNTs at 180A. From macro to micro-examination of the fracture surfaces, pure ductile modes constituting elliptical cup and cone type isotropic flow was evident in all specimens. Detailed confirmation of the pull-out fracture mode of MWCNTs has highlighted in the scanning electron microscope (SEM) images that intimated a methodical contribution in load-transfer from matrix to the fiber under axial load. Overall, a concise en-route for MWCNTs inducement is well-appointed through tube fillers along with an activating facilitator (TiO2) in contrast to stereotype fillers for improved behavior termed as modified TIG welding joint process in study.

Enhancement of load transfer by interfacial bonding in Al-Cu-Mg joints under the in-situ synergistic effect of carbon nanotubes and silicon nitride

Revealing the mechanism of laser welded aluminum alloy joints in-situ reinforced by carbon nanotubes based on microstructural evolution

Enhanced load transfer by designing mechanical interfacial bonding in carbon nanotube reinforced aluminum composites

Coupling effect of electrophoretic deposition and solid-phase joining on CNTs/Mg multi-material joint

Significant reinforcement of mechanical properties in laser welding aluminum alloy with carbon nanotubes added

Improvement of interfacial interaction and mechanical properties in aluminum matrix composites reinforced with Cu-coated carbon nanotubes

Toughening and strengthening of Cu-coated carbon nanotubes reinforced AZ61 magnesium matrix nanocomposites by improving interfacial bonding

Enhanced ductility by Mg addition in the CNT/Al-Cu composites via flake powder metallurgy

High mechanical strengthened CNTs/Al composite concepts with robust interface and intragranular reinforcement achieved via interfacial thermite reaction

Microstructure evolution and mechanical properties of CNT/Al composite joints via friction stir welding

Modified TIG Welding Joint Process: An Approach to Improve Microstructure and Fracto-Mechanical Behavior by MWCNTs Inducement in Al-Mg-Si Alloy

Optimization of the mechanical properties of CNTs/Cu composite by regulating the size of interfacial TiC

Improving the mechanical properties of carbon nanotubes reinforced pure aluminum matrix composites by achieving non-equilibrium interface

On the role of carbon nanotubes addition in carbon fiber-reinforced magnesium matrix composites

Remarkable improvement of mechanical properties of layered CNTs/Al composites with Cu decorated on CNTs

Significant increase in mechanical performance of the C/C-Mo joint by controlling the interfacial defects

Synergistic enhancement effect of flame-grown carbon nanotubes and chopped carbon fibers on adhesive joint of thermosetting laminate

Simultaneous reduction in laser welding energy consumption and strength improvement of aluminum alloy joint by addition of trace carbon nanotubes

Chemically dealloyed Mg–Cu alloy lamina as an interlayer for reinforcing a C/C composite – TC4 alloy vacuum brazed joint

Enhancement of thermal–mechanical performances via a selective CNTs configuration in laminated CNTs/AZ31B composite

Study on the Mechanism of CNTs Regulating the Microstructures and Properties of Al–Cu–Mg Alloy