Abstract:We investigate the strain-rate-dependent mechanical behavior and deformation mechanisms of a refractory high entropy alloy, Ti29Zr24Nb23Hf24 (at.%), with a single-phase body-centered cubic (BCC) structure. High-temperature compression tests were conducted at temperatures from 700 to 1100°C at strain rates ranging from 10-3 to 10 s-1. A sudden stress drop after yield point was observed at higher temperatures and lower strain rates with the Zener-Holloman parameter, lnZ, in the range of 17.2-20.7. Such a softening behavior can be related to the interaction of dislocations with short-range clustering. However, at higher strain rates or lower temperatures (lnZ>25.0), kink bands were activated being responsible for the continuous strengthening of the alloy in competition with the softening mechanism. Systematic TEM investigations reveal that dislocation walls formed along {110} planes and dislocation loops were observed at a low strain of 6% at a high strain rate of 1 s-1 and 800°C. Kink band induced dynamic recrystallization is evident upon further straining. On the other hand, at low strain rate of 10-3 s-1 and 800°C, discontinuous recrystallization mechanisms become dominant with arrays of dislocations forming in front of the bulged boundaries of parent grains. These sub-grain boundaries eventually turn into high-angle grain boundaries. We also investigate the deformation mechanism of the alloy under extremely high strain rate (103 s-1) at room temperature. The specimen exhibits extensive kink bands with arrays of dislocation walls. As further strained, multiple slip systems can be activated and the interaction of dislocation walls plays a vital role in the strain hardening of the alloy.

High Strain Rate Sensitivity of Hardness in Quinary Ti-Zr-Hf-Cu-Ni High Entropy Metallic Glass Thin Films

High strain rate sensitivity of hardness in Ti-Zr-Hf-Be-(Cu/Ni) high entropy bulk metallic glasses

Effect of Zr content on the strain rate sensitivity of nanohardness of Ti-Zr-Cu-Ni-Al thin film metallic glass

Mechanical responses and plastic rheological behavior of Ti–Zr-Hf-Co-Ni-Cu metallic glass thin films deposited with different substrate temperatures during nanoindentation and nanoscratch process

Structural transformation and rheological processes in bulk metallic glass Zr41Ti14Cu12.5Ni10Be22.5

Enhanced mechanical, thermal and electrical properties of high‐entropy HfMoNbTaTiVWZr thin film metallic glass and its nitrides

Strain-Rate-Dependent Deformation Behavior of Ti29Zr24Nb23Hf24 High Entropy Alloys at Elevated and Room Temperature

High strain rate in situ micropillar compression of a Zr-based metallic glass

Effect of temperature and strain rate on deformation behavior in metallic glassy films

Ultrastrong behaviors of a non-equiatomic Ti-Zr-Ni-Cu-Be high entropy metallic glass with ultrahigh glass forming ability

Effect of Strain Rate on Mechanical Deformation Behavior in CuZr Metallic Glass

Microstructure and mechanical properties of nano dual-phase TiCuNi metallic glass films achieved by modulating magnetron sputtering temperature

Hardness, Yield Strength, and Plastic Flow in Thin Film Metallic-Glass

The Failure Stress of Bulk Metallic Glasses under Very High Strain Rate

Quantifying the Size-Dependent Shear Banding Behavior in High-Entropy Alloy-Based Nanolayered Glass

The role of nano-scale elastic heterogeneity in mechanical and tribological behaviors of a Cu–Zr based metallic glass thin film

Enhanced Mechanical Properties of Metallic Glass Thin Films via Modification of Structural Heterogeneity

Indentation properties of Cu–Zr–Al metallic-glass thin films at elevated temperatures via molecular dynamics simulation

Dependence of Shear Yield Strain and Shear Transformation Zone on the Glass Transition Temperature in Thin Film Metallic Glasses

Room Temperature Nanoindentation Creep Behavior of TiZrHfBeCu(Ni) High Entropy Bulk Metallic Glasses

Crystallization and mechanical behavior of (Hf, Zr)–Ti–Cu–Ni–Al metallic glasses