Abstract:Tensile rheological behavior of the Zr35Ti30Be27·5Cu7.5 metallic glass under conditions of high strain rates (strain rates ranging from 0.05 s−1 to 0.5 s−1) within the supercooled liquid region was studied. The stress-strain curve reveals that this metallic glass demonstrates non-Newtonian flow characteristics under these circumstances. The peak stress associated with stress overshoot increases as temperature decreases and strain rate increases. However, the steady-state flow stress displays an anomalous decrease due to rapid necking at high strain rates. Subsequently, the thermal processing map of the Zr35Ti30Be27·5Cu7.5 metallic glass was established and analyzed. It reveals that the alloy has relatively excellent thermoplastic forming ability at temperature between 630 K and 655 K and strain rates between 0.05 s−1-0.2 s−1. We found that under strain rates ε ˙ ≥ 10 − 2 s − 1 , the strain rate is the primary factor influencing normalized viscosity. Therefore, we developed a simplified Maxwell-Pulse constitutive model applicable to metallic glass in the supercooled liquid region under high strain rate conditions, by simplifying the constitutive equation for steady-state flow stress using a simplified formula for normalized viscosity calculation. The predictions of this simplified modified model align well with experimental values. By comparing the simplified and unsimplified Maxwell-Pulse constitutive models, the overall fitting accuracy of the simplified model was improved by 3–5%, with the highest improvement of 67% in the steady-state flow stress stage. These results indicate that the modified model accurately reflects the stress-strain relationship for the Zr35Ti30Be27·5Cu7.5 metallic glass under high temperature and high strain rate tensile conditions.

The Failure Stress of Bulk Metallic Glasses under Very High Strain Rate

Mechanical Behavior of A Zr-Based Metallic Glass at Elevated Temperature under High Strain Rate

Effect of Strain Rate on Yielding Strength of a Zr-based Bulk Metallic Glass

Structural transformation and rheological processes in bulk metallic glass Zr41Ti14Cu12.5Ni10Be22.5

High Strain Rate Induced Embrittlement of Zr-Based Bulk Metallic Glass

Ductile to brittle transition of fracture of a Zr-based bulk metallic glass: Strain rate effect

La-based bulk metallic glass failure analysis under static and dynamic loading

Ductile Fracture of Bulk Metallic Glass Zr 50 Cu 40 Al 10 under High Strain-Rate Loading

Densification and Strain Hardening of a Metallic Glass under Tension at Room Temperature.

The rheological behavior and constitutive model of Zr35Ti30Be27·5Cu7.5 metallic glass under high strain rate tensile conditions within the supercooled liquid region

High strain rate in situ micropillar compression of a Zr-based metallic glass

Effect of Strain Rate on Mechanical Deformation Behavior in CuZr Metallic Glass

High Temperature Deformation Behaviors of Ti40Zr25Ni3Cu12Be20 Bulk Metallic Glass

Dynamic Behavior of A Zr-Based Metallic Glass at Cryogenic Temperature

On the Serrated Behavior during Plastic Deformation of a Zr-Based Bulk Metallic Glass

Effect of Applied Stress on the Mechanical Properties of a Zr-Cu-Ag-Al Bulk Metallic Glass with Two Different Structure States

Investigating the Fracture Behaviors of Bulk Metallic Glasses under Different Dynamic Loading Rates Using Phase-Field Model

Stress-induced Structural Change During Superplastic Deformation of Bulk Zr-based Metallic Glass

Strain-dependent shear-band structure in a Zr-based bulk metallic glass

Strain-hardening and failure mechanisms of metallic glasses under triaxial stress

Homogeneous plastic deformation in a Cu-based bulk amorphous alloy