Abstract:Developing high-temperature metallic glass thin films (MGTFs) with excellent combination properties is crucial for extending the practical applications of metallic glasses. A high-temperature multicomponent Mo-based MGTF with tunable microstructure prepared by single-target magnetron sputtering was presented in this study. Corresponding mechanical behaviors and thermal stability of MGTFs related to microstructure are systemically explored. By adjusting deposition parameters (pressure and power), the microstructure of as-deposited MGTFs can be altered from the dense homogeneous type to the loose nanoglass type. Such structure evolution can be explained by the competition between the surface diffusion and geometric shadowing effect. MGTFs with dense microstructure possess smaller surface roughness, higher hardness, higher Young's modulus, and better wear resistance. Moreover, they also possess higher thermal stability where the fully amorphous structure and smooth surface can be well maintained after annealing at 1123 K for 30 min. By contrast, the MGTF with nanoglass microstructure shows inferior mechanical properties and thermal stability due to plentiful loose interface regions, providing abundant free volumes during deformation and acting as favorable crystal nucleation sites during annealing. The correlation between the microstructure and properties of as-deposited MGTFs is clarified with the universal scaling law of glasses. The annealing treatment distinctly increases the hardness and Young's modulus of MGTFs. Meanwhile, after annealing, pop-in behaviors occur in the as-annealed MGTFs with dense microstructure but not in the as-annealed MGTF with nanoglass microstructure during the nanoindentation. These phenomena can be rationalized by the annihilation of free volumes during annealing and the evolution of the dynamical variable, shear transition zone, for the plastic deformation in MGTFs.

Microstructure and mechanical properties of nano dual-phase TiCuNi metallic glass films achieved by modulating magnetron sputtering temperature

Enhanced Mechanical Properties of Metallic Glass Thin Films via Modification of Structural Heterogeneity

High-temperature Mo-based Metallic Glass Thin Films with Tunable Microstructure and Mechanical Behaviors

Orientation Controlled Microstructure and Mechanical Properties of TiN-Cu Nanocomposite Films

Novel class of nanostructured metallic glass films with superior and tunable mechanical properties

Tailoring Nanostructured Ni-Nb Metallic Glassy Thin Films by Substrate Temperature

Microstructure and Mechanical Properties of Co-Deposited Ti-Ni Films Prepared by Magnetron Sputtering

The Microstructure and Mechanical Properties of Ti-Si-N Nanocomposite Coating Prepared by DC Magnetron Sputtering

Mechanical responses and plastic rheological behavior of Ti–Zr-Hf-Co-Ni-Cu metallic glass thin films deposited with different substrate temperatures during nanoindentation and nanoscratch process

Formation and mechanical properties of bulk Cu-Ti-Zr-Ni metallic glasses with high glass forming ability

Nano-mechanical Properties of TaNbHfZr Metallic Glass Films

Microstructure and mechanical properties of nano-multilayer structured (AlCrMoTaTi)Nx coatings deposited by closed field unbalanced magnetron sputtering

Enhanced mechanical properties and in vitro corrosion behavior of amorphous and devitrified Ti40Zr10Cu38Pd12 metallic glass

The Structure and Mechanical Properties of Cr-based Cr-Ti Alloy Films

Microstructure and Optical Properties of Ti 54.5 Ni 45.5 Nanocrystalline Thin Film

Strengthening Mechanisms in NiTi(NbFe)/amorphous-CuZrAl Multilayered Thin Films

Effect of Chemical Composition on the Thermoplastic Formability and Nanoindentation of Ti-Based Bulk Metallic Glasses

Improved Tensile Ductility by Severe Plastic Deformation for Nano-Structured Metallic Glass.

The Microstructure and Tribological Behavior of Ti/a-C and Ti/a-C:H Films Prepared by Magnetron Sputtering

Enhanced Micro/nano-Tribological Performance in Partially Crystallized 60niti Film

Ultra-strong and ductile amorphous-crystalline Ti-Zr-Hf-Nb-Ta/Co-Ni-V nanolaminate thin films