Abstract:The effects of thermal treatments on metallic glass nanolaminates (NLs), with a composition of Zr$_{24}$Cu$_{76}$ and Zr$_{61}$Cu$_{39}$ and a bilayer period of 50 nm, were explored to control their mechanical properties through annealing-induced atomic structure modifications, structural relaxation, and partial crystallisation. Annealing treatments up to 330 °C ($T$ < $T_g$, the glass transition temperature) maintain the amorphous structure of the NLs, while inducing atomic structural relaxation, densification, and free volume annihilation, reducing the formation of corrugations on fracture surfaces. Atom probe tomography measurements reveal that annealing at 330 °C for 60 mins also causes intermixing between layers, altering their compositions to Zr$_{44}$Cu$_{56}$ and Zr$_{55}$Cu$_{45}$ with increased mixing enthalpy. Moreover, the NLs exhibit superior thermal stability against crystallisation compared to their monolithic counterparts, remaining amorphous up to 420 °C, while the monolithic Zr$_{24}$Cu$_{76}$ and Zr$_{61}$Cu$_{39}$ films are crystalline at 390 °C, as a result of chemical interdiffusion and the heterogeneous NL structure of delaying the onset of crystallisation. Annealing treatments $T$ > $T_g$ ($\sim$420 °C) induce partial crystallisation, forming Cu-Zr-based intermetallic and Zr-oxide phases, whereas annealing $T$ < $T_g$ (330 °C) retains a visible layer structure. Nanoindentation analyses show a progressive increase in elastic modulus and hardness for higher annealing temperatures as a result of structural relaxation and likely nanocrystal formation, with a maximum hardness equal to 7.6 $\pm$ 0.2 GPa obtained after heat treatment at 420 °C for 60 mins and exceeding the rule-of-mixtures. These results highlight the potential of thermal treatments to tailor the structural, mechanical and thermal properties of metallic glass NLs.

Effects of substrate temperature on structure, thermal stability and mechanical property of a Zr-based metallic glass thin film

Deposition and Characterization of AZO Thin Films on Flexible Glass Substrates Using DC Magnetron Sputtering Technique

Effect of temperature and strain rate on deformation behavior in metallic glassy films

Enhanced Mechanical Properties of Metallic Glass Thin Films via Modification of Structural Heterogeneity

Mechanical responses and plastic rheological behavior of Ti–Zr-Hf-Co-Ni-Cu metallic glass thin films deposited with different substrate temperatures during nanoindentation and nanoscratch process

Effects of RF Magnetron Sputtering Power on the Mechanical Behavior of Zr-Cu-Based Metallic Glass Thin Films

Effects of substrate temperature on the properties of heavy Ga-doped ZnO transparent conductive film by RF magnetron sputtering

Tailoring Nanostructured Ni-Nb Metallic Glassy Thin Films by Substrate Temperature

Substrate Temperature Effect on Growth Behavior and Microstructure-Properties Relationship in Amorphous Ni-Nb Thin Films

Crystallization Behavior Upon Heating and Cooling in Cu50Zr50 Metallic Glass Thin Films

Tuning properties and behavior of magnetron sputtered Zr-Hf-Cu metallic glasses

Mechanical properties and thermal stability of thin film metallic glass compared to bulk metallic glass from ambient to elevated temperatures

Mechanical properties and thermal stability of ZrCuAlx thin film metallic glasses: Experiments and first-principle calculations

Structural transformation and rheological processes in bulk metallic glass Zr41Ti14Cu12.5Ni10Be22.5

Tailoring microstructure and optical properties of MgZnO film on glass by substrate temperature

Influences of Substrate Temperature on Properties of ZGO Thin Films Prepared by Middle-frequency Alternative Magnetron Sputtering

Thermal modification of ZrCu metallic glass nanolaminates: Structure and mechanical properties

Microstructure, infrared optical properties and thermal stability of ZrB2 and double-layer-structure Al2O3/ZrB2 thin films by magnetron sputtering technique

Indentation properties of Cu–Zr–Al metallic-glass thin films at elevated temperatures via molecular dynamics simulation

Mechanical Property Improvement by Texture Control of Magnetron Co-Sputtered Zr-Ti Films

Molecular dynamics simulation of fabrication of Cu mono-component metallic glass by physical vapor deposition on Zr substrate