Abstract:Dynamic mechanical relaxation processes of amorphous alloys are very important to understand plastic deformation, glass transition phenomenon, diffusion behavior and crystallization. How to establish the correlation between mechanical properties and mechanical relaxation modes is one of key issues. In the current research, with the help of dynamic mechanical analysis (DMA), dynamic mechanical behavior of Zr$_{50}$Cu$_{40}$Al$_{10}$ bulk metallic glass from room temperature to supercooled liquid region was probed. In parallel, based on the uniaxial tensile tests, high-temperature flow behavior of Zr$_{50}$Cu$_{40}$Al$_{10}$ metallic glass around glass transition temperature were investigated. Dynamic mechanical behavior and high temperature deformation behavior were discussed in the framework of quasi-point defects theory. The results demonstrated that main $\alpha $ relaxation process of metallic glass can be well described by the quasi-point defects theory. Based on internal friction of Zr$_{50}$Cu$_{40}$Al$_{10}$ metallic glass, activation energy of elementary movement of atoms $U_\beta$ is 0.63 eV. In addition, correlation factor $\chi $ corresponding to concentration of the quasi-point defects in solid glass remains almost constant below the glass transition temperature. When the temperature above the glass transition temperature, the correlation factor $\chi $ increases by increasing the temperature (below the crystallization temperature). Finally, high temperature flow behavior in tensile mode near the glass transition temperature of Zr$_{50}$Cu$_{40}$Al$_{10}$ metallic glass was studied. The normalized viscosity decreases with increasing strain rate at low temperatures or high strain rates, indicating a non-Newtonian flow behavior. Whereas Newtonian flow behavior is observed at higher temperatures and lower strain rates. The apparent viscosity is affected by temperature and strain rate. High-temperature flow behavior of Zr$_{50}$Cu$_{40}$Al$_{10}$ metallic glass was described by stretched exponential function and free volume theory. Specifically, experimental master curve of the high temperature flow behavior of metallic glass is in good agreement with the prediction of the quasi-point defects theory, which provides a new insight on understanding of viscous effects during high temperature deformation of solid glasses.

Mechanical properties and thermal stability of thin film metallic glass compared to bulk metallic glass from ambient to elevated temperatures

Insight on the Process Ability of Bulk Metallic Glasses by Thermo-Mechanical Analysis and Dynamic Mechanical Analysis

Mechanical properties and thermal stability of ZrCuAlx thin film metallic glasses: Experiments and first-principle calculations

High temperature deformation behaviors of the Zr 63.36 Cu 14.52 Ni 10.12 Al 12 bulk metallic glass

Structural transformation and rheological processes in bulk metallic glass Zr41Ti14Cu12.5Ni10Be22.5

Thermophysical and Mechanical Properties of Multicomponent Zr37Hf16Ni12.5Cu12.5Al11Co6Nb5 Bulk Glass-Forming Alloy

Unraveling the microstructural heterogeneity and plasticity of Zr<sub>50</sub>Cu<sub>40</sub>Al<sub>10</sub> bulk metallic glass by nanoindentation

DYNAMIC RELAXATION CHARACTERISTICS AND HIGH TEMPERATURE FLOW BEHAVIOR OF ZR-BASED BULK METALLIC GLASS

Mechanical properties of Ti16.7Zr16.7Hf16.7Cu16.7Ni16.7Be16.7 high-entropy bulk metallic glass

Thermophysical and Mechanical Properties of Multicomponent Zr37Hf16Ni12.5Cu12.5Al1 1co6nb5 Bulk Glass-Forming Alloy

Thermal Stability and Mechanical Properties of Zr50Ti5Cu18Ni17Al10 Bulk Metallic Glass

Microstructural, thermal and mechanical behavior of co-sputtered binary Zr–Cu thin film metallic glasses

High-temperature Mo-based Metallic Glass Thin Films with Tunable Microstructure and Mechanical Behaviors

Static and cyclic mechanical behaviours and fracture mechanisms of Zr-based metallic glass at elevated temperatures

Mechanical Behavior of Zr 65 Al 10 Ni 10 Cu 15 and Zr 52 : 5 Al 10 Ni 10 Cu 15 Be 12 : 5 Bulk Metallic Glasses

Mechanical Behavior of A Zr-Based Metallic Glass at Elevated Temperature under High Strain Rate

Mechanical Behavior of Zr65Al10Ni10Cu15 and Zr52.5Al10Ni10Cu15Be12.5 Bulk Metallic Glasses

Mechanical Properties of Monolithic Zr62Al8Ni13Cu17 Bulk Metallic Glass

Microscopic Structural Evolution during Ultrastable Metallic Glass Formation

Enhanced Mechanical Properties of Metallic Glass Thin Films via Modification of Structural Heterogeneity

High Thermal Stability And Sluggish Crystallization Kinetics Of High-Entropy Bulk Metallic Glasses