Abstract:SiZrOC aerogels were synthesized through the pyrolysis of the zirconium source-doped SiOC system using zirconyl chloride octahydrate (ZrOCl2·8H2O) at temperatures ranging from 900 to 1300 °C. This study investigates the microstructure evolution and phase separation of SiOC and SiZrOC aerogels during the pyrolysis process. Upon pyrolysis, both aerogels exhibited a Si-O-C structure with a high thermal stability. The introduction of zirconium elements significantly enhanced the pore volume (3.20 cm3/g) and porosity (96.0%) and reduced the thermal conductivity (0.023 W·m-1·K-1) of the organic-inorganic precursor aerogel. Moreover, the three-dimensional pore structure was retained even under high-temperature pyrolysis conditions. SiZrOC-1100 displayed a high specific surface area of 273.52 m2/g, a high pore volume of 1.70 cm3/g, and a low thermal conductivity of 0.033 W·m-1·K-1. At high temperatures, the SiZrOC phase transformation produces tetragonal ZrO2, which inhibits the graphitization process of free carbon and the growth of SiC grains. Furthermore, the phase separation process of the SiOxCy matrix structure generated oxygen-rich SiOxC4-x units, while carbon-rich SiOxC4-x units were negligible below a pyrolysis temperature of 1200 °C. Between 900 and 1200 °C, SiZrOC is composed of amorphous SiOC, amorphous ZrO2, microcrystalline t-ZrO2, and free carbon phase. These findings provide valuable insights into the preparation of high-performance SiOC aerogels.

Preparation of SiO2-ZrO2 Aerogels and the Adsorption Performance for Cerium

Synthesis of porous silica gel and study on the adsorption of cerium

Adsorption of Ce(IV) Ions from Aqueous Solution by Silica Aerogels

Preparation and Characterization of High Surface Area Zro2 Aerogel Modified by Sio2

Effect of Zr on the Microstructure and High-Temperature Phase Separation Evolution of SiOC Aerogels

Preparation and Characterization of Hydrophobic Mesoporous SiO2 Aerogel

ZrC/C aerogel with high compressive strength by a carbothermic process

Preparation of La2Zr2O7 composite SiO2 aerogels and their fiber-reinforced materials for thermal insulation applications

Synthesis of high temperature resistant ZrO2-SiO2 composite aerogels via “thiol-ene” click reaction

Synthesis of ZrO2 aerogels by supercritical CO2 fluid drying technology

Preparation and characterization of high specific surface area Ce 0.5Zr0.5O2 mixed oxide

Preparation and Thermo-Mechanical Properties of Modified Gelatin Reinforced SiO2 Aerogels

Preparation of SiO2 aerogel by water glass: effect of different sodium removal methods on aerogel properties

Synthesis and characterization of SiO2-Al2O3 composite aerogel using inorganic aluminum salt as raw material

Facile preparation of ZrCO composite aerogel with high specific surface area and low thermal conductivity

Preparation and Characterization of Magnetic Nanoparticles/SiO2 Porous Composite Xerogels

Metal oxide aerogels: Preparation and application for the uranium removal from aqueous solution

Preparation of monolithic Al2O3–SiO2 aerogels with high-temperature resistance using boehmite nanorods

Preparation and Structural Evolution of SiOC Preceramic Aerogel During High-Temperature Treatment

The Investigation of an Organic Acid Assisted Sol–gel Method for Preparing Monolithic Zirconia Aerogels

Preparation of Silica Aerogels Using Ctab/Sds As Template and Their Efficient Adsorption