Abstract:In this study, a high-performance Mg–8Gd–2Y–1Zn–6Li (wt%) alloy having a TYS of 202 ± 2.6 MPa, UTS of 243 ± 2.1 MPa and EL of 10.7 ± 2.3% was successfully fabricated by casting, heat treatment and hot extrusion. The effects of intermetallic compounds on microstructure and mechanical properties were deeply investigated. The results show that the studied alloy consists of coarse deformed α-Mg grains with (0001) basal texture, fine recrystallized β-Li grains with (002) texture and three Mg3RE phase variants, which are bulk Mg3RE phase with a size range of 10–30 µm, spot Mg3RE phase with a size range of 1–2 µm and spherical Mg3RE phase with a size range of 0.3–1 µm, respectively. The spherical Mg3RE phase has a strong dispersion strengthening effect, while the bulk Mg3RE phase acts as crack resources and deteriorates the ductility. A novel island-like <math>β1R</math> phase (FCC, a = 0.78 nm) is found for the first time in the Mg-Gd-Li based alloys. It has a coherent <math>(1̅12)β1R</math>//<math>(101̅0)α</math> interface at the broad facet and a semi-coherent <math>(1̅11)β1R</math>//<math>(112̅0)α</math> interface at the end facet. The <math>β1R</math> phase transforms from <math>βH</math> phase at the semi-coherent interface by atomic shear of RE and Mg atoms. The <math>β1R</math> phase provides a significant precipitation strengthening effect to the studied alloy, while the dissolution of <math>β1R</math> phase results in the age-softening phenomenon. The high-performance of the studied alloy is mainly attributed to the α/β duplex structure, three Mg3RE phase variants, and <math>β1R</math> phase.

Microstructure And Mechanical Properties Of Mg-8li-4al-0.3y Alloys

Microstructure and Mechanical Properties of As-extruded Mg-5Li-3Al-2Zn-xY Alloy

Microstructure and mechanical properties of Mg–8Li–xAl–0.5Ca alloys

Microstructure and Mechanical Properties of As-Cast and Extruded Mg-8Li-3Al-0.7Si Alloy

Microstructures and Mechanical Properties of Mg-6Al-1Zn-Y Alloys

Microstructure and mechanical properties of as-cast and extruded Mg-8Li-1Al-0.5Sn alloy

Microstructure and Mechanical Properties of As-Cast and Extruded Mg–8Li–3Al–2Zn–0.5Nd Alloy

Microstructure and Mechanical Properties of Mg–8Li–(1, 3)al–(0, 1)Y Alloys

Microstructure and mechanical properties of as-cast ultralight and high strength Mg-10Li-3Al-3Zn-xY alloy with multi-precipitates

Microstructure and Mechanical Properties of Mg–6Li–xAl–0.8Sn Alloys

The Effect of Y Content on Microstructure and Tensile Properties of the As-Extruded Mg–1Al–xY Alloy

Microstructure and Mechanical Properties of Extruded Mg-Zn-Y Alloy

Microstructure and mechanical properties of heat-treated Mg-6.2Li-3.5Al-3Y alloy

Effects of Y on Microstructure and Mechanical Properties of Mg-8Li-4Zn-xY Magnesium Alloy and Its 1 Mm Thick Sheet

Effect of Y content on microstructure evolution and tensile properties of Mg-8Li-3Al-2Sn-xY alloys

Microstructures and mechanical properties of as-extruded Mg–8Gd–2Y–1Zn–6Li alloy

Microstructures and mechanical properties of Mg-6 Al-1 Zn-Y alloys.

Microstructure and Mechanical Behavior of As‐Cast, Extruded and Nanocrystalline Mg‐9Li‐3Al‐2.5Sr Alloy

Microstructure and Mechanical Properties of Mg-6Al-0.3Mn-xY Alloys Prepared by Casting and Hot Rolling

Microstructure, Texture, and Mechanical Properties of As-Extruded Mg-xLi-3Al-2Zn-0.2Zr Alloys (x = 5, 7, 8, 9, 11 Wt%)

Microstructures and mechanical properties of Mg-6Li-6.5Gd-1Dy-2Zn alloys