Abstract:The hot deformation behavior of TZM-1.0 wt% ZrO 2 alloy in the temperature range of 1000–1600 °C and strain rate range of 0.005–1 s −1 was studied by hot compression method. The constitutive equation and hot working diagram were established, and the microstructure evolution was emphatically analyzed by SEM and EBSD. The results indicate that the flow stress decreases with the increase of temperature and the decrease of strain rate, and ZrO 2 particles can improve the stability of TZM alloy in rate-control during hot deformation. The constitutive equation accurately predicted the correlation coefficient as high as 0.9685, calculated the average activation energy Q = 426 kJ mol −1 , and obtained the best process parameters of 1150 °C–1250 °C /0.01–0.05 s −1 under 0.7 strain. The unstable zone was mainly composed of a small number of coarse grains and a large number of fine grains. The main reason for flow instability was the disharmonious deformation between coarse and fine grains during compression. The optimum hot working zone consists of more uniform equiaxed grains. However, EBSD observed that at a strain rate of 1 s −1 , the recrystallization fraction at 1600 °C was lower than 1200 °C, and the dynamic recrystallization (DRX) and texture evolution trends at 1200 °C and 1600 °C were completely different. The abnormal changes in recrystallization fraction and texture evolution at 1600 °C were due to the competition between deformed grain growth and DRX on energy storage consumption, and the effect of deformed grain growth on energy storage consumption was greater than that of DRX. At 1600 °C/1 s −1 , the growth of deformed grains was dominant, exhibiting strong texture components in the [001] direction, with〈100〉fibers as the main component and the highest peak texture strength. As the strain rate decreases, DRX dominates and weakens the texture strength, resulting in a significant decrease in fibers.

High Temperature Properties and High Heat Flux Shock Damage Behavior of Fine Grain Tungsten Reinforced by ZrC Particles

Influence of Zrc Content on the Elevated Temperature Tensile Properties of Zrcp/W Composites

Dense Submicron-Sized ZrC – W Composite Produced by Reactive Melt in Fi Ltration at 1200 ° C

Tungsten Joining with Copper Alloy and Its High Heat Load Performance

Thermal Shock Performance of CVD Tungsten Coating at Elevated Temperatures

High temperature fracture mechanism of ultrafine WC-Co cemented carbides containing (Ti,W)C

The High Thermal Stability Induced by a Synergistic Effect of ZrC Nanoparticles and Re Solution in W Matrix in Hot Rolled Tungsten Alloy

Novel low temperature derived W f /W-ZrC-Cu composites by reactive infiltration with enhanced mechanical and thermal physical properties

Improving the Comprehensive Properties of ZrO2–C Materials with Aid of TiO2 Addition

Microstructure and Hardening Effect of Pure Tungsten and ZrO2 Strengthened Tungsten under Carbon Ion Irradiation at 700°C

Microstructure and Mechanical Properties of Nano-Size Zirconium Carbide Dispersion Strengthened Tungsten Alloys Fabricated by Spark Plasma Sintering Method

Surface modification of ZrC dispersion-strengthened W under low energy He plasma irradiation

Effect of ZrC nano-powder addition on the microstructure and mechanical properties of binderless tungsten carbide fabricated by spark plasma sintering

Effect of different crystal forms of ZrO 2 on the microstructure and properties of tungsten alloys

Microstructural Effects of Y2O3 and TiC Additions in Tungsten

Superior Radiation Resistance of ZrO2-Modified W Composites

The effects of SiC addition on the sintering densification, phases, microstructure and mechanical properties of W

Deformation behavior and microstructure evolution of TZM alloy with 1.0 wt%ZrO 2 under high temperature compression

Fabrication of nanocrystalline and ultra-hard tungsten alloy by dual particles dispersion strengthening

Effects of ZrC content on the microstructure and mechanical property of ZrC/ZTA composites consolidated by hot pressing

Novel TiC-based composites with enhanced mechanical properties