Abstract:The effect of Ag addition on the precipitation evolution and interfacial segregation for Al–Mg–Si alloys was systematically investigated by atomic resolution high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM), atom probe tomography (APT) and density functional theory (DFT) calculation. At the early aging stage, Ag atoms could enter clusters and refine the distribution of these clusters. Then, Ag atoms preferentially segregate at the GP zone/α-Al and β"/α-Al interfaces at the peak aging stage by the replacement of Al atoms in FCC matrix. With prolonging aging time, Ag atoms generally incorporate into the interior of β" precipitate, facilitating the formation of QP lattice (a hexagonal network of Si atomic columns) and the local symmetry substructures, Ag sub-unit (1) and Ag sub-unit (2). At the over-aged stage, the Ag sub-unit (1) and Ag sub-unit (2) could transform to the β′Ag (i.e. β′Ag1 and β′Ag2.) and Q′Ag unit cells, respectively. All the precipitates at the over-aging stage have a composite and disordered structure due to the coexistence of different unit cells (β′Ag1, β′Ag2, Q′Ag and β′) and the non-periodic arrangement of Ag atoms within the precipitate. In the equilibrium stage, the incorporated Ag atoms in the precipitates release into the α-Al matrix as solute atoms or form Ag particles. In general, Ag atoms undergo a process of “segregate at the precipitate/matrix interface → incorporate into the interior of precipitate → release into the α-Al matrix” during the precipitation for Al–Mg–Si–Ag alloys. Besides, Ag segregation is found at the interfaces of almost all metastable phases (including GP zone, β″, β′/β′Ag phase) in Al–Mg–Si–Ag alloys. The Ag segregation at the β′/α-Al interface could increase the length/diameter ratio of β′ phase and thus promote the additional strengthening potential of these alloys. These findings provide a new route for precipitation hardening by promoting the nucleation and morphology evolution of precipitates.

Study on suppression and acceleration of aging precipitation reaction in Al-Cu alloys

Atomic-scale study on the precipitation behavior of an Al-Zn-Mg-Cu alloy during isochronal aging

Effect of combined addition of Ag and Cu on the precipitation behavior for an Al-Mg-Si alloy

The Effect of Cu Addition on the Precipitation Sequence in the Al-Si-Mg-Cr Alloy

Effects of Cu content on the precipitation process of Al–Zn–Mg alloys

Influence of Mg and Cu on Precipitation Behaviors and Mechanical Properties of Al-Si Alloys

Effect of Cu addition on precipitation and age-hardening response of an Al-15%Mg2Si alloy

Effect of Ag Addition on the Precipitation Evolution and Interfacial Segregation for Al–Mg–Si Alloy

Precipitation behavior of an Al–Cu–Li–X alloy and competing relationships among precipitates at different aging temperatures

The Structural and Compositional Evolution of Precipitates in Al-Mg-Si-Cu Alloy

Study of the precipitate evolution mechanism in an Al-Mg-Si-Cu alloy with Si-rich and low Cu composition

Precipitation behavior during re-aging of Al-Mg-Si-Cu alloy

Microstructure and Precipitation Hardening of As-cast Al-Cu-Mg-Mn-Ag-(-Si) Alloys

Precipitates evolution and strengthening of Al–Mg2Si alloys containing high-Cu contents during ageing process

Study on properties and precipitation behavior of 6000 series alloys with high Mg/Si ratios and Cu contents

Effect of multi-stage aging on the precipitation strengthening and mechanical properties for an Al-Mg-Si-Ag alloy

Effect of Cu Content on Precipitation and Age-Hardening Behavior in Al-Mg-Si-xCu Alloys

Effect of In addition on the precipitation behavior and mechanical property for Al-Mg-Si alloys

The effect of solution temperature on the precipitates evolution and aging hardening response of Al-15%Mg2Si(-1%Cu) alloys

The Aging Feature of Al-Li-Cu-Mg-Zr Alloy Containing Sc

Effects of Cu Addition on the Microstructural Evolution during Ageing of 6000 and 7000 Al Alloys