Abstract:We report on the design, fabrication and testing of three types of coupling structures for hybrid chalcogenide glass Ge23Sb7S70-Silicon (GeSbS-Si) photonic integrated circuit platforms. The first type is a fully etched GeSbS grating coupler defined directly in the GeSbS film. Coupling losses of 5.3 dB and waveguide-to-waveguide back-reflections of 3.4% were measured at a wavelength of 1553 nm. Hybrid GeSbS-to-Si butt couplers and adiabatic couplers transmitting light between GeSbS and Si single-mode waveguides were further developed. The hybrid butt couplers (HBCs) feature coupling losses of 2.7 dB and 9.2% back-reflection. The hybrid adiabatic couplers (HACs) exhibit coupling losses of 0.7 dB and negligible back-reflection. Both HBCs and HACs have passbands exceeding the 100 nm measurement range of the test setup. GeSbS grating couplers and GeSbS-to-Si waveguide couplers can be co-fabricated in the same process flow, providing, for example, a means to first couple high optical power levels required for nonlinear signal processing directly into GeSbS waveguides and to later transition into Si waveguides after attenuation of the pump. Moreover, GeSbS waveguides and HBC transitions have been fabricated on post-processed silicon photonics chips obtained from a commercially available foundry service, with a previously deposited 2 μm thick top waveguide cladding. This fabrication protocol demonstrates the compatibility of the developed integration scheme with standard silicon photonics technology with a complete back-end-of-line process.

Comparison of fabrication tolerance of broadband silicon photonic directional couplers

Comparison of Fiber-to-Waveguide Couplers in Point Diffraction Interferometer Based on Waveguide Reference Wavefront Source

Broadband Polarization-Independent Directional Coupler Using Asymmetric-Waveguides

Broadband Couplers for Hybrid Silicon-Chalcogenide Glass Photonic Integrated Circuits

Silicon-on-Insulator Waveguide Devices for Broadband Mid-Infrared Photonics

Compact broadband silicon 3 dB coupler based on shortcuts to adiabaticity.

High-Performance 2 × 2 Bent Directional Couplers Designed with an Efficient Semi-Inverse Design Method

Broadband and fabrication-tolerant 3-dB couplers with topological valley edge modes

Broad-band Efficient Edge Couplers for Compact Silicon Photonic Circuits

High-efficiency Wideband SiNx-on-SOI Grating Coupler with Low Fabrication Complexity.

High-efficiency Grating Coupler Based on Fast Directional Optimization and Robust Layout Strategy in 130 Nm CMOS Process.

Broadband Silicon Nitride Power Splitter Based on Bent Directional Couplers with Low Thermal Sensitivity

An asymmetric non-uniform 3-dB directional coupler with 300-nm bandwidth

Broadband Coupler Between Silicon Waveguide and Hybrid Plasmonic Waveguide

High-Q and High-Order Side-Coupled Air-Mode Nanobeam Photonic Crystal Cavities in Silicon

Asymmetric, non-uniform 3-dB directional coupler with 300-nm bandwidth and a small footprint

Design and Implementation of Broadband Hybrid 3-dB Couplers with Silicon-Based IPD Technology

Relaxed-tolerance subwavelength grating coupler

Broadband focusing grating couplers for suspended-membrane waveguides.

Inter-die Fabrication Uniformity of Silicon Photonic Fiber-Towaveguide Edge Couplers

Low Loss, Large Bandwidth Fiber-Chip Edge Couplers Based on Silicon-on-Insulator Platform