Abstract:Mode division multiplexing on chips can enhance optical interconnect capacity tremendously, avoiding expensive wavelength division multiplexing technology. It is a critical functionality to switch or process different mode channels together for future optical network-on-chip based on mode division multiplexing. However, controlling different modes simultaneously in the traditional wide multimode waveguide is very difficult due to very different optical properties of the modes. Here, we introduce a novel concept to realize compact multimode 3 dB couplers, which can process multiple modes of a densely-packed waveguide array bus waveguide simultaneously. A dual-mode 3 dB coupler with two input and two output bus waveguides, each of which supports two transverse electrical modes, is designed with simulated insertion losses of less than 0.23 dB and crosstalks of similar to-18.1 dB for both modes at the central wavelength. The relative phases at the two outputs are 90 degrees for both modes theoretically. The designed device has a short coupling length of 21 mu m with SiO2 cladding. The fabricated one demonstrates insertion losses of similar to 0.3 dB and similar to 0.5 dB and crosstalks of -19.6 dB and -14.1 dB for the two modes, respectively. A triple-mode 2 x 2 3 dB coupler, consisting of six coupled waveguides in the coupling region of 87 mu m length, shows average insertion losses and crosstalks for all three modes of similar to 0.25 dB and similar to-14 dB, respectively. The present design method is also extended to 3 dB couplers for more modes theoretically.

High-Performance 2 × 2 Bent Directional Couplers Designed with an Efficient Semi-Inverse Design Method

Broadband Polarization-Independent Directional Coupler Using Asymmetric-Waveguides

Compact broadband silicon 3 dB coupler based on shortcuts to adiabaticity.

Low-loss and Broadband 2 × 2 Silicon Thermo-Optic Mach–Zehnder Switch with Bent Directional Couplers

Ultra-compact Silicon Mode (de)multiplexer Based on Directional Couplers with Subwavelength Sidewall Corrugations

Efficient Directional Coupler Based on Plasmonic Waveguide for Photonic Integrated Circuits

High-efficiency Grating Coupler Based on Fast Directional Optimization and Robust Layout Strategy in 130 Nm CMOS Process.

Ultracompact And Wideband Power Splitter Based On Triple Photonic Crystal Waveguides Directional Coupler

Ultra-broadband and compact 2$\times$2 3-dB silicon adiabatic coupler based on supermode-injected adjoint shape optimization

An asymmetric non-uniform 3-dB directional coupler with 300-nm bandwidth

High-Efficiency Unidirectional Dual-Wavelength-Band Grating Coupler with 1D Subwavelength Structure

Silicon Two-Mode Multi/demultiplexer Based on Tapered Couplers

Asymmetric, non-uniform 3-dB directional coupler with 300-nm bandwidth and a small footprint

Experimental Demonstration of Ultra-Compact Directional Couplers Based on Silicon Hybrid Plasmonic Waveguides

Comparison of fabrication tolerance of broadband silicon photonic directional couplers

Multimode 3 Db Coupler Based on Symmetrically Coupled Waveguides for On-Chipbrk Mode Division Multiplexing

Design and optimization of a 2x2 half-wave optical coupler

Ultra-broadband Low-Loss 2×2 MZI (Mach-Zehnder Interferometer)-Based Thermo-Optic Switch with Bent Directional Couplers on Silicon

Ultra-compact Polarization-Independent Directional Couplers Utilizing a Subwavelength Structure.

An Ultracompact Silicon Triplexer Based on Cascaded Bent Directional Couplers

Low-Loss Calibration-Free 2 × 2 Mach-Zehnder Switches With Varied-Width Multimode-Interference Couplers