Abstract:The sol-gel process is a more chemical method (wet chemical method) for the synthesis of various nanostructures, especially metal oxide nanoparticles. In this method, the molecular precursor (usually metal alkoxide) is dissolved in water or alcohol and converted to gel by heating and stirring by hydrolysis/alcoholysis. Since the gel obtained from the hydrolysis/alcoholysis process is wet or damp, it should be dried using appropriate methods depending on the desired properties and application of the gel. For example, if it is an alcoholic solution, the drying process is done by burning alcohol. After the drying stage, the produced gels are powdered and then calcined. The sol-gel method is a cost-effective method and due to the low reaction temperature there is good control over the chemical composition of the products. The sol-gel method can be used in the process of making ceramics as a molding material and can be used as an intermediate between thin films of metal oxides in various applications. The materials obtained from the sol-gel method are used in various optical, electronic, energy, surface engineering, biosensors, and pharmaceutical and separation technologies (such as chromatography). The sol-gel method is a conventional and industrial method for the synthesis of nanoparticles with different chemical composition. The basis of the sol-gel method is the production of a homogeneous sol from the precursors and its conversion into a gel. The solvent in the gel is then removed from the gel structure and the remaining gel is dried. The properties of the dried gel depend significantly on the drying method. In other words, the “removing solvent method” is selected according to the application in which the gel will be used. Dried gels in various ways are used in industries such as surface coating, building insulation, and the production of special clothing. It is worth mentioning that, by grinding the gel by special mills, it is possible to achieve nanoparticles.

Progress in Research on Nanometer Al2o3 Fabricated by Sol-Gel Method

Research progress of ultrafine alumina fiber prepared by sol-gel method: A review

The New Progress in the Application Technology of Nanophase Materials

Sol–gel Research in China: a Brief History and Recent Research Trends in Synthesis of Sol–gel Derived Materials and Their Applications

Green synthesis of nanometer gamma-Al2O3 powders by sol-gel method

Research and Progress of Sol-gel Auto-Combustion Process in the Synthesis of Nanomaterials

Nanomaterial by Sol-Gel Method: Synthesis and Application

Synthesis of Nano-Alumina Hydroxide Sol Using Sol-gel Method

Fabrication of ZnO/Al2O3 core–shell nanostructures and crystalline Al2O3 nanotube

Advancing in Research of One-dimensional Silicon Nano-materials

Zinc Oxide Nanostructure Fabricated In Anodic Alumina Oxide Template By Sol-Gel Method

Morphological Characterization of γ-Al 2 O 3 Membranes Fabricated from Ammonium Aluminum Sulphate

Effect of the Way of Water Addition on the Morphology of Nano-Sized Al2O3 Powders Prepared by Sol-Gel Method

Preparation of Fe_2O_3/Al Nanocomposite by Sol-gel Method

Future Application of the Preparation Al_2O_3 Nanometer by Hydrothermal Method

Research and prospect on functional thin films by sol-gel process

Alumina Ceramic Nanofibers: An Overview of the Spinning Gel Preparation, Manufacturing Process, and Application

Progress in Sol-Gel Technology for the Coatings of Fabrics

A Novel Method To Synthesize Amorphous Silica−Alumina Materials with Mesoporous Distribution without Using Templates and Pore-Regulating Agents

Preparation and Characterization of γ-Al2O3 Nanocrystals by Hydrothermal Assisted Sol-gel Method

Nano Alumina: A Review of the Powder Synthesis Method