Abstract:A reactive computational fluid dynamic-discrete element model (CFD-DEM) is coupled with a one-dimensional thermally thick model to simulate biomass pyrolysis in a three-dimensional rotary drum reactor. Furthermore, a diffusion-based voidage algorithm and a competitive pyrolysis scheme are also implemented. After validation, the integrated model is applied to explore the effects of the drum rotating speed and the filling level. The particle distribution and motion, heat transfer, and conversion behavior are selected as indicators. Results show that the particle inventory within the central transverse section is affected by both the mechanic effect of rotation and the axial conveying due to the product gas flux. The angle of repose for the central section first increases and then decreases with rotating speed, while increasing the filling level reduces the angle of repose and delays the bed sinking. Moreover, the particles at the bed surface are energetic and thus the area of high-value granular temperature is distributed along the bed surface. The particle accumulated displacement increases and the particle residence time at the wall reduces with the rotating speed and the filling level. In addition, the specific heat conduction rate can be promoted by decreasing the rotating speed and the filling level. A higher rotating speed or a lower filling level is favorable for particle mixing and thus makes particles heat up uniformly. Finally, a higher rotating speed or filling level exerts a negative impact on biomass conversion. These findings are helpful for better understanding biomass pyrolysis in a rotary drum reactor.

Modeling the Total Residence Time in a Rotary Dryer

Simulation of Biomass Pyrolysis in a Rotary Drum by Coupling CFD-DEM with a One-Dimensional Thermally Thick Model

Determination of Residence Time of Grains in Drum Dryer

SIMULATION OF BIOMASS DRYING IN A DIRECT CONTACT ROTARY DRYER

Two dimensional modeling of sewage sludge flow in a double-axis continuous paddle dryer

Heat and Mass Transfer in Agitated, Co-, or Countercurrent Conductive–Convective Heated Drum Dryer

Model of axial transport of particles in rotary kiln

Modeling of Muti-layer Far-Infrared Dryer

An Investigation of Heat Transfer of Flexible Fibers in a Rotating Drum Dryer Using the Discrete Element Method

Static and dynamic characteristics of rotary kiln reactor during processing of biomass and municipal solid waste

Modeling Simultaneous Heat and Mass Transfer for Microwave Drying on Apple

Research on Sludge Drying Characteristics in a Double-Axis Paddle Dryer by Coupling Markov Chain and Penetration Theory

The simulation analysis and experiment of drying thin-layer radish strips

Theoretical and experimental research on heat and mass transfer in a turbine thin layer dryer

Modeling of drying kinetics of green peas by reaction engineering approach

Computer simulation of a rotary dryer. Part II: Heat and Mass Transfer

Mathematical Modeling of Thin-layer Infrared Drying of Dewatered Municipal Sewage Sludge (DWMSS)

Mathematical Modeling of the Process of Operation of the Drying Chamber of a Tower Grain Dryer With a Suction Air Flow

Measurement and Simulation of the Contact Drying of Sewage Sludge in a Nara-type Paddle Dryer

Granule transport and mean residence time in horizontal drum with inclined flights