Abstract:Energy consumption, environmental issues, product quality are actual problems related to grain drying processes. It is necessary to pay attention to designing new structures of energy-efficient grain dryers. A structure of an energy-efficient grain dryer based on thermosiphons has been designed; its energy consumption is 3.5...6.8 MJ/kg depending on surface temperature and air flow rate. The dryer includes a layer heater, a drying chamber, a heat generator, a heater, a noria for loading the product, and fans. The structural features of the dryer allow the drying process to be carried out without direct contact between the combustion gases and the product. The efficiency of the designed structure was evaluated for such indicators as heat transfer coefficients to the grain flow, specific energy costs, moisture content, the relative humidity of the air leaving the dryer. The values of coefficients of the heat transfer to the grain flow vary within 36...58 W/m2K at speeds 2.5...8 mm/s. An increase in the flow rate by 3.2 times leads to an increase in the heat transfer coefficient by 1.6 times. The moisture content of the air at the outlet of the dryer reaches 60 g/kg, while the relative humidity is 90 %, which is several times higher than the parameters for convective mine grain dryers. Energy consumption for drying at the surface temperature of thermosiphons Ts=142.9 °C for various grain flow rates is close to a minimum. The energy consumption is lower than in existing convective dryers. 21 % is spent on heating grain in the dryer; 54 % ‒ on moisture evaporation; and 23.6 % are losses. If we consider the energy spent on moisture evaporation usable, the efficiency of convective dryers is only 40 % while that of dryers based on thermosiphons is 54.1 %. It is expected that the designed structure could be a solution for small farmers in the post-harvest drying process

Determination of Residence Time of Grains in Drum Dryer

Justification of the design and regime parameters of a mobile grain dryer

Optimal Design of an Angular Box for a Mixed Flow Grain Dryer

Designing the structure and determining the mode characteristics of the grain dryer based on thermosiphons

Performance analysis of natural convection biomass operated grain dryer coupled with latent heat storage medium

An Investigation of Heat Transfer of Flexible Fibers in a Rotating Drum Dryer Using the Discrete Element Method

Granule transport and mean residence time in horizontal drum with inclined flights

Three-dimensional axial dispersion dynamics of granular flow in the rolling-regime rotating drum

Numerical analysis of residence time for particle impregnation in a rotating drum

Batch grain drier design and performance prediction

Comparison of Image-Based Measuring Methods for Analysis of Particle Mixing in Rotary Drum

DEM investigation of the axial dispersion behavior of a binary mixture in the rotating drum

Study on heat and mass transfer characteristics in drying process of drum dryer based on the DEM-CFD coupled method

DETERMINATION OF DISK TEMPERATURE FOR GRAIN ROASTING IN CONTACT TYPE INSTALLATION

DEM simulation and analysis of particle mixing and heat conduction in a rotating drum

Experimental and numerical study of the airflow distribution in mixed-flow grain dryers

The impact of changing drum rotation direction on fabric motion and drying performance in clothes dryers

Numerical investigation of the particle flow behaviors in a fluidized-bed drum by CFD-DEM

A Solar Assisted Heat Pump Drying System for Grain In-Store Drying

Theoretical And Experimental Study Of Solar Assisted Heat Pump System For Grain Storage Drying

Experimental and Theoretical Assessment of a Solar Assisted Heat Pump System for In-Bin Grain Drying: A Comprehensive Case Study