Abstract:The stiffness, mass and damping matrix of 17 degree of freedom (DOF) vehicle model are derived on the basis of Lagrange equation. The bilinear discrete cohesive zone model (DCZM) is utilized to simulate the bonding per-formance of the interface between the track slab and the CA mortar layer. The ballastless track-bridge element model is proposed by the direct stiffness method, and the vehicle-ballastless track-simply supported bridge vertical-longitudinal coupled model with consideration of interface damage is established. In addition, based on the ballastless track-bridge element model, the ballastless track continuous welded rail (CWR) model on multi -span simply supported bridge is proposed. The ballastless track CWR model is employed to obtain the initial longitudinal relative displacement of track slab-CA mortar layer interface under bridge thermal load. The displacement response of ballastless track-bridge structure is taken as the initial displacement field of vehicle -track-bridge coupled dynamic model. The vehicle-track-bridge coupled model is adopted to obtain the inter-face damage of ballastless track under the action of bridge thermal load and vehicle dynamic load. Then, the effects of bridge temperature and longitudinal stiffness of the DCZM on the longitudinal relative displacement of ballastless track-bridge structure are investigated in detail. The mechanism and distribution law of interface damage of ballastless track under different running speeds, CA mortar layer gap length and DCZM parameters are discussed. The conclusions obtained in this paper could provide a technical guide for the formulation of main-tenance standards for interface damage of ballastless track on simply supported bridge. Then, some parametric studies are presented based on the model in this paper. The analysis indicates that the longitudinal relative displacement of the track slab-CA mortar layer becomes large at both ends and small in the middle within the range of a simply supported bridge. When there is CA mortar layer void, the ballastless track interface is in the stress state of tension + shear mixed mode. The recommended threshold of void length of CA mortar layer is 0.65 m. More attention shall be paid to the construction quality of interface between the track slab and the CA mortar layer.

ANALYSIS ON INFLUENCING FACTORS OF RAIL BRAKING FORCE OF LONGITUDINAL CONNECTED BALLASTLESS CWR ON BRIDGE IN HIGH-SPEED RAILWAY

Effect of Rail Restraints on Seismic Responses of Cushioning Railway Bridges

Analysis of breaking -bending forces of ballastless track on the high -speed railway long -span continuous beam bridge

Longitudinal force of continuous welded rail on simply-supported bridge under 30 t axle load heavy haul

Mechanical deformation Properties of Continuous Welded Rail on Kilometer-Span Suspension Bridge for High-speed Railway

Mapping Relation between Rail and Bridge Deformation Considering Nonlinear Contact of Interlayer

Vertical Dynamic Analysis of Ballastless Tracks on Train-Track- Bridge System

Longitudinal stiffness of frame pier and its influence on longitudinal force on CWR

Fatigue Characteristics of Long-Span Bridge-Double Block Ballastless Track System

Analytical Investigation on the Geometry of Longitudinal Continuous Track in High-Speed Rail Corresponding to Lateral Bridge Deformation

Force Analysis of CRTS II Slab Track on Long Span Bridge under Damage Conditions

Theoretical and Experimental Study on Longitudinal Interaction of CWR on Railway Cable-stayed Bridge

Numerical Analysis of Interface Damage in Ballastless Track on Simply Supported Bridge Due to Thermal and Vehicle Dynamic Load

Study on the influence of damage characteristics of longitudinal ballastless track on the dynamic performance of train-track-bridge coupled systems

Rail broken gap study on continuous welded rail on cable-stayed bridge of high-speed railway

Study on broken plate force of ballastless track on high-speed railway long-span continuous beam bridge

Applicability of Small Resistance Fastener on Long-Span Continuous Bridges of High-Speed Railway

An Analytical Solution to the Mapping Relationship Between Bridge Structures Vertical Deformation and Rail Deformation of High-Speed Railway

Effects of Pier Deformation on Train Operations within High-Speed Railway Ballastless Track–Bridge Systems

Interaction between long -span continuous arch bridge and continuously welded rail

Effect of Bridge Pier Deformation for High Speed Railway with Ballastless Track on Train Running Safety and Comfort