Mechanical Behavior and Track Geometry Evaluation of Long-Span Cable-Stayed Bridges with Ballastless Tracks
Zhihui Zhu,Zengzhen Ren,Weiqi Zheng,Wenshuo Liu,Diping Li,Guang Ma
DOI: https://doi.org/10.1080/15732479.2024.2320694
2024-01-01
Structure and Infrastructure Engineering
Abstract:Ballastless tracks have been widely used in China's high-speed railways; however, they have only recently been laid on 300 m-class cable-stayed bridges. For cable-stayed bridges with a longer span, the mechanical behavior of ballastless tracks is unclear, and the track construction acceptance method is incomplete, restricting the development of cable-stayed bridges with ballastless tracks. Taking four 300-1000 m-class cable-stayed bridges as research objects, this study established static track-bridge interaction models and dynamic vehicle-bridge coupled models. By evaluating static and dynamic indices, the feasibility of laying ballastless tracks and operating high-speed trains at 350 km/h on cable-stayed bridges was analyzed. Based on the results of dynamic analysis and track geometry evaluation, a 40 m chord was proposed for track geometry acceptance on cable-stayed bridges. The accuracy of the simulation results was verified through the measured data from the Xi-Cheng Railway. The numerical results showed that the 300-1000 m-class cable-stayed bridges with ballastless tracks had good static and dynamic characteristics. The 300 m baseline was unsuitable for the long-wave irregularity evaluation of tracks on cable-stayed bridges, and the 60 m chord was easily affected by wavelengths above 200 m, leading to misjudgment of the evaluation results. The 5 mm limits of the 40 m chord could be used for track geometry acceptance on cable-stayed bridges. Finally, a comprehensive evaluation method for track geometry, namely 10 m chord, 40 m chord, and minimum vertical curve radius, was formed.