Longitudinal force of continuous welded rail on simply-supported bridge under 30 t axle load heavy haul

Dai Gonglian,Zhu Junpu,Yan Bin
DOI: https://doi.org/10.15951/j.tmgcxb.2015.08.007
2015-01-01
Abstract:In order to investigate heavy haul rails CWR longitudinal force distribution laws and the influence of key parameters such as support stiffness limits, a CWR analytical model of T-shaped simply-supported bridge with ballast track has been established. Based on the above model under the combined effect of temperature and live load, distribution laws of longitudinal force and pier tops’ horizontal force have been analyzed and compared with normal rail traffic as well. The influences of the span numbers and static arrangements have been investigated; the different compound modes of forces due to braking, acceleration and bending of the deck have been compared, and the limiting values of longitudinal stiffness at bearings have been put forward. The research shows that, when difference of substructure stiffness is not significant, the multi-span simply supported bridge modeling could be simplified to 8 spans, the longitudinal force of heavy haul railway is greater than normal rail traffic by 10% ~31%, when static arrangement is in equality difference of pier top force due to bending of the deck is maximum up to 49%, considering the live load and braking force pier top horizontal force is 22% larger than the traditional algebraic sum method, for heavy haul double track 24m, 32m, 40m and 48m simply-supported bridges the recommended limits of longitudinal stiffness at bearings should not be less than 600kN/cm, 800kN/cm, 1000kN/cm and 1200kN/cm.
What problem does this paper attempt to address?